or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › UDS Builds › Anyone in Raleigh area who can help with UDS build?
New Posts  All Forums:Forum Nav:

Anyone in Raleigh area who can help with UDS build?

post #1 of 5
Thread Starter 
I have a drum and had a guy that said he would help, but has since backed out and my drum just sits. So I was wondering if anyone in the Raleigh area could either loan a hand or tools and space to put one together. The drum is a sealed drum, so the top needs cutting off and still needs a good burning.

I am not in a hurry, so I can work around schedules and can pay with food or beer. Will be my first build, so guidance may be needed.

Also, unrelated to the question above, where are y'all getting your meet?

Thanks SMF!
post #2 of 5

do you have a grinder? the lid can be grinded off... you really dont need more room to work with the build other than where its sitting now... I live no where near you... but.. Ill help as much as I can here

 

mike

post #3 of 5

http://www.smokingmeatforums.com/t/140829/first-usd-build 

my build.... plus i did further mods... but just get that basics... with the right tools and hardware in hand... it takes maybe 2 hours.. from start to season :)
 

post #4 of 5

Just pushing you to get started on your build. I'm not  near as full of information as Webo is but as of today I have knocked out a very large piece of my very first UDS build. Once I got started it was a breeze. Just a few more parts, a paint job and its completed. http://www.smokingmeatforums.com/t/151646/my-first-uds-build Already thinking about my next build. 

post #5 of 5

Grinder and a hand drill is all you need.

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: UDS Builds
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › UDS Builds › Anyone in Raleigh area who can help with UDS build?