New Posts  All Forums:Forum Nav:

MES temp probe

post #1 of 5
Thread Starter 

OK it is my turn for a stupid  question .

did any off you MES owners drill a hole in the door off the MES and fix in a temp' prob (like in a reverse flow )so you can glance at the temperature as you pass by.if yes did it work?

sausage.gif

post #2 of 5

Nope, all I do is feed the Probe down through the top vent since I keep it all the way open it works great.  I usually have several probes going at once...

post #3 of 5

You can just shut the door on the wire too, it won't hurt the probe wire or the door insulation.

post #4 of 5
Thread Starter 



 

Quote:
Originally Posted by SmokinAl View Post

You can just shut the door on the wire too, it won't hurt the probe wire or the door insulation.

sorry i did not  explained  myself correctly
i mean a permanent one like this

DSC04578.JPGDSC04577.JPG
 

 

post #5 of 5

If it were me I would not drill a hole in the door. I would get a digital therm and run the wire through the top vent or in the door, then shut the door on the wire.

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Meat Thermometers