Drum burn in questions

Discussion in 'UDS Builds' started by rp ribking, Aug 26, 2010.

  1. rp ribking

    rp ribking Smoking Fanatic OTBS Member

    I just brought home 3 drums from work.

    The drums had little lead additive bars wrapped in paper and plastic and then they were wrapped in a plastic baggy inside of a large plastic bag. 

    Should I bail on these drums or do a burn? 

    Another question is how do you start a fire in it. 

    Thanks RP
     
  2. coffee_junkie

    coffee_junkie Master of the Pit OTBS Member

    Lead is a nasty thing, I would find a food grade drum or one that held oil, both can be easily burned out. Good luck.
     
  3. ddave

    ddave Master of the Pit OTBS Member SMF Premier Member

    Lead wrapped in paper, then plastic, then plastic, then another plastic bag??

    I'd say you have nothing to worry about. Certainly safer than one that held petroleum.

    If it is bare metal inside, no need to burn.  Wire wheel any rust spots, if there are any, and get to building.[​IMG]

    Dave
     

Share This Page