Question About Electric smoker

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

niniron

Fire Starter
Original poster
Feb 11, 2008
53
10
I was woundering what the best way to keep the temp steady.
 
I use a ecb with a 1000 watt hot plate-I use a thick moveing blanket wrapped around it to get to 225-I have also added lava rock around & on top-seems to help also.
 
For my little lectric, I ensure that I always have water in the pan and try to not lift the lid to much to "check" on the meat. Make sure that you buy a thermometer that you can keep in the meat at all times and can se the temp without lifting the lid or opening the door. I have a remote therm so that I can se the temp wherever I am at.
 
Have you ever thought of wiring in a thermostat?, that is if you are having a hard time keeping the heat from too hot...
Just another idea
biggrin.gif
 
MAke a wind break..........That will help alot.......The thermostat is a good idea too.........I made one using the thermostat from an electric frying pan.............
 
Wiring in a temperature controller works well if you are having trouble keeping the temp steady when the unit is in need of maintaining temp.

If wind is your issue a wind block is the answer

For keeping temp steady after opening the door then the use of a water pan or fire bricks will help.

If outdoor temps are too low like here in Michigan then moving to Florida will help
icon_lol.gif
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky