DIY smoker remodel

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

rhjbarney

Newbie
Original poster
Mar 19, 2019
7
2
Just remodeled my smoker it used to be a hot food holding box but was only 110 VAC 1200 heating element which only got temp, up to 180 deg, converted it to 220 VAC and a 5400 watt heating element and installed the Fireboard thermometer which is WI-FI as the main controller of the smoker no more babysitting for me i can put something in the smoker and go literally anywhere as long as i have cell phone service and have full control of my smoker adj temp,up or down, turn it on and off and view up to 5 meat probes Fireboard is the best thing since canned beer.
20190309_111351.jpg
20190309_174352.jpg
20190309_092811.jpg
20190309_092818.jpg
20190309_092831.jpg
20190309_092614.jpg
20190310_101256.jpg
Screenshot_20190312-165944_FireBoard.jpg
20190309_111351.jpg
20190309_174352.jpg
20190309_092811.jpg
20190309_092818.jpg
20190309_092831.jpg
20190309_092614.jpg
20190310_101256.jpg
Screenshot_20190312-165944_FireBoard.jpg
 
  • Like
Reactions: Jonok and Steve H
Looks great, I'd put a fan in the top looks like its running a lot hotter at the top or a bigger outlet vent to even temps out top to bottom
 
Nice, did you make that case holding the Fireboard? I might do that for mine
Yes they sell one for about $55.but its just big enough for unit i got mine @ Walmart ozark trails dry box for $20. And big enough to store cables and charger drilled a hole on down side with a rubber grommet to run cables through.
 
Looks great, I'd put a fan in the top looks like its running a lot hotter at the top or a bigger outlet vent to even temps out top to bottom
It had a fan in bottom that circulated air up the diffuser in the back but gave up after the second fan seems to jam up and quits turning. I dont think the motor bearings like the smoke.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky