Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. fifdynutz

    trouble with okj...tuning plates or horizon plate?

    I'll start looking for another inlet asap...Thank you very much for the help so far...I'll report back soon
  2. fifdynutz

    trouble with okj...tuning plates or horizon plate?

    It currently only has the factory air inlet at the bottom...so you would recommend adding an upper and extending the stack?
  3. 20141109_161858.jpg

    20141109_161858.jpg

    • fifdynutz
    • Media item
    • Comments: 0
    • Album: trouble with okj...tuning plates or horizon plate?
  4. fifdynutz

    trouble with okj...tuning plates or horizon plate?

    When testing I adjusted the plates ever which way, and even tried completely removing the one to the far left and it made it worse, tried removing the elbow and it was under a 5* difference...I checked temps with 2 tel tru in the lid and a maverick grate thermometer I moved around...you think j...
  5. trouble with okj...tuning plates or horizon plate?

    trouble with okj...tuning plates or horizon plate?

  6. fifdynutz

    trouble with okj...tuning plates or horizon plate?

  7. 20141123_151343.jpg

    20141123_151343.jpg

    • fifdynutz
    • Media item
    • Comments: 0
    • Album: trouble with okj...tuning plates or horizon plate?
  8. fifdynutz

    trouble with okj...tuning plates or horizon plate?

    Currently a few hours into a dry run with tuning plates...still have at least a 25* difference from end to end...is this going to be inevitable?
  9. fifdynutz

    trouble with okj...tuning plates or horizon plate?

    Non fb end
  10. fifdynutz

    trouble with okj...tuning plates or horizon plate?

    It is in the factory location on the left...The plate I am talking about would be similar to the horizon baffle plate with small holes going to bigger holes on the left side
  11. fifdynutz

    trouble with okj...tuning plates or horizon plate?

    I heavily sealed every joint with fireplace cement when I assembled it, and it has 3/8 rope gasket on the doors, it is pretty air tight so it may be safe to rule that out...just trying to decide between tuning plates or a horizon style baffle...I have access to about any metal working tools...
  12. fifdynutz

    trouble with okj...tuning plates or horizon plate?

    Hey guys, fairly new here but done plenty of reading. Recently completed a 250 gallon reverse flow trailer build and kind of got the bug for tinkering with building smokers...anyway, I recently sold my wsm to purchase an oklahoma joe highland to play with...wsm was too easy haha...well I got...
  13. fifdynutz

    My reverse flow trailer build

    Will do! Thank you!
  14. My reverse flow trailer build

    My reverse flow trailer build

  15. fifdynutz

    My reverse flow trailer build

    Hey guys, new here and recently build my first large smoker. I currently use a WSM and love it, but I'm a tinkerer and have enough materials at my disposal that I decided to build a large rf smoker trailer...I utilized felons calc but enlarged many of the dimensions as needed, a lot of it was...
  16. 20141019_143453.jpg

    20141019_143453.jpg

    • fifdynutz
    • Media item
    • Comments: 0
    • Album: My reverse flow trailer build
  17. 20141019_133841.jpg

    20141019_133841.jpg

    • fifdynutz
    • Media item
    • Comments: 0
    • Album: My reverse flow trailer build
  18. 20141017_175924.jpg

    20141017_175924.jpg

    • fifdynutz
    • Media item
    • Comments: 0
    • Album: My reverse flow trailer build
  19. 20141017_130339.jpg

    20141017_130339.jpg

    • fifdynutz
    • Media item
    • Comments: 0
    • Album: My reverse flow trailer build
  20. 20141016_192436.jpg

    20141016_192436.jpg

    • fifdynutz
    • Media item
    • Comments: 0
    • Album: My reverse flow trailer build
Top Bottom
Back
Clicky