Search results
-
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
-
RF 250 propane tank build.
my apprentice . All I need now are handles, firebox breathers, wood storage, and a paint job. Oh yea and I had to go with a traditional smoker so I could use it this weekend but I do plan on moving the stack and putting in a rf plate later- matty0335
- Post #33
- Forum: Reverse Flow
-
RF 250 propane tank build.
A side view. U can see the braces where my racks will go. Don't laugh at my tiny work area! It does what it needs to, so far!- matty0335
- Post #32
- Forum: Reverse Flow
-
RF 250 propane tank build.
My beast of a firebox! Still only 95% for what it calls for. Cutting the door an finishing box tomorrow. Hopefully will also be able to start an finish cooking grates as that won't b too hard.- matty0335
- Post #31
- Forum: Reverse Flow
-
RF 250 propane tank build.
The rain got me a little behind but I was able to get the second door cut and the hole for the fb cleaned up some. Was able to cut the plates for the fb out lastnight and plan on assembly in the am.- matty0335
- Post #30
- Forum: Reverse Flow
-
RF 250 propane tank build.
Prob not today hut in off tomorrow! Gonna get the second door cut out and hopefully build and mount the firebox- matty0335
- Post #27
- Forum: Reverse Flow
-
RF 250 propane tank build.
Yea I plan on cleaning it up w grinder. The cut only went through the outside of the tank, the inside seam is showing through so if I don't cut it more I will have to fill in on top of the inner seam- matty0335
- Post #24
- Forum: Reverse Flow
-
RF 250 propane tank build.
. I cut too close to the weld and the seam shows, should I just fill in iver it or go ahead and cut through the rest of the way? The other side is worse so I'm thinking just cut through the rest of the way- matty0335
- Post #22
- Forum: Reverse Flow
-
RF 250 propane tank build.
I plan on adding at least one more brace to each side connecting the trailer and cc for more stability and cutting out the other door hopefully Wednesday. Have also been flirting with the idea of just going with a traditional smoker instead of rf but can't make up my mind.- matty0335
- Post #20
- Forum: Reverse Flow
-
RF 250 propane tank build.
. Added a piece of I beam to the middle of the tongue. . Got one of the cc doors cut out and the tank welded to the trailer. . This is not a very good pic but got the hole cut for the fb just have to clean it up and get it square and build and mount the firebox- matty0335
- Post #19
- Forum: Reverse Flow
-
RF 250 propane tank build.
Alright I've got the tank strapped down in place on the trailer have my doors drawn out ready to cut tomorrow and get all the gunk burned out. I plan on cuttin the fb hole and mounting the fb while the tank is on the trailer anybody have any tips besides make sure it's straight? Lol hope I can...- matty0335
- Post #17
- Forum: Reverse Flow
-
RF 250 propane tank build.
I was able to get most of my metal supplies today so hopefully I'll be able to start on my firebox tomorrow!- matty0335
- Post #16
- Forum: Reverse Flow
-
RF 250 propane tank build.
U think that plus the wood rack will tie it in pretty good?- matty0335
- Post #14
- Forum: Reverse Flow
