Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Search results
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
Okay will check into those. As mostly the drying of the casings will be done. As for hot smoking plan to use a smoke tube or may even add smoke daddy unit to it. And the cooking process will be steam cooking not so much pork butts or anything like that. Only building this for deer season snacks
I’m i
n iowa so we are not far fetched on the unit structure needed. However, I have 100 plus pounds of deer I have to process. So this will have to work for time
Being.
Any ideas on how to insulate that proofer? I was thinking having a few welding blankets maybe seamed together and make like a...
Jc,
We’ll that other fridge fell through.
However not sure the plans but got to pick it up Saturday.
Picking up this prooofer/dehumidifier. It’s about two hours from my place however he said it’s an aluminum construction and doesn’t believe it has any insulation.. so I’m wondering what I should...
Chiming in as I’m getting a proofer for a built since my other unit failed.
Have you been able to control the temp? Any issues with the holdings with it not being insulated? I have a little different burner setup that I would be running however, pretty close to the same.
Thinking bout building this however in past I’ve used steam
Cooking method
Any reconditions I should insulate the inside with as well as material for inner walls
I recently started on this build and ran a smoke course through it last night. Through some pellets on a pan and set on burner. Temp held well around 180-200 but as pellets got hotter was more around 220
I noticed the panels at the end start bowing a little but wondering more about the...
Happen to have link for the element you ran. Be curious to see a wire diagram with the additional element s together with the pid.
If don't have that's okay just brainstorming ideas for different cooking temps needed
Syrenrods hows it going?? On also thinking of going the same route. How did the last schematic wire up with the one switch with illuminated light inside ???
Did that 3000 watt oven element work well ??
Ive attached my smoker body ill be using the element for.
Dave, First and foremost great aptitude on building and great looking smoker!
I had some questions regarding what bigger element you were thinking of going too ?
I have a 120v pid controlled brinkman element but, here in Iowa our winters are cold so it struggles to keep up.
I am rebuilding...
Not much feedback but wanted to share what I've done.
I raised the Amazn smoker box up off the bottom of the smoker by installing another shelf
About a foot in half up.
Got a 1" inch hole saw from menards after work and drilled to holes about an inch apart and about three inches below where...
Okay fellas here's the break down of the smoker, I will also post a picture of the inside
I have a 4 inch stack mounted directly in center of build with adjustable damper.
Dimensions are: 23 inches wide x 42 inches tall x 14 inches deep.
Again, I don't have any holes drilled on the side for...