Search results
-
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
-
How big of heating elements to use?
I run two elements in my 1950 fridge smoker. They total 1500W at 120v. Works great and has no problem maintaining temp. We primarily use the fridge smoker for deer sausage. I also replaced all the insulation with Roxul on the 1950 smoker which I believe made a huge difference! The outside...- smokinkarl
- Post #3
- Forum: Fridge/Freezer Builds
-
Wood stove top fan in smoker?
Has anyone tried one of these wood stove top fans in their smoker? http://www.ebay.com/itm/Caframo-T805B-Alcona-8-inch-Wood-Burning-Stove-Top-Heat-Powered-Stove-Fan-Black-/380797417062 It says that it starts at 230 but I would be curious to see if you could get any movement at say 145-165...- smokinkarl
- Thread
- Replies: 1
- Forum: Smoker Builds
-
How big of heating elements to use?
Starting another smoker build on a double door SS freezer 50x59x30. This smoker will be ran on 220V due to its size and since I do not plan to replace insulation. I would like to use two elements since I do not feel like making a heat deflector for even heat distribution on this one. Any...- smokinkarl
- Thread
- Replies: 2
- Forum: Fridge/Freezer Builds
-
SSR to heating element wire HOT?
Must have not stated the burner application clearly... 750 Watts per burner for a combined total of 1500 Watts which should put me at 12.5 amps roughly. Of course that is not including any other electronics wired in. I am suspecting that the issue lies within the wiring from the SSR to the...- smokinkarl
- Post #12
- Forum: Fridge/Freezer Builds
-
SSR to heating element wire HOT?
Dward, yes they are wired in parallel... guess I should have done some simple math. To the best of my knowledge it is wired exactly the same as it was as a hot plate from amazon. The only difference is that I added a PID and SSR before the original rheostats. The wiring is also aluminum which...- smokinkarl
- Post #9
- Forum: Fridge/Freezer Builds
-
SSR to heating element wire HOT?
1500 watt combined @ 110v. Sorry I should have added that. My supply line for the control box does not get warm @ all... I still don't understand how wire rated to 1000 F would be getting hot @ all...- smokinkarl
- Post #5
- Forum: Fridge/Freezer Builds
-
SSR to heating element wire HOT?
1500 watt combined @ 110v. Sorry I should have added that. My supply line for the control box does not get warm @ all... I still don't understand how wire rated to 1000 F would be getting hot @ all...- smokinkarl
- Post #4
- Forum: Fridge/Freezer Builds
-
SSR to heating element wire HOT?
- smokinkarl
- Album
- Comments: 0
-
SSR to heating element wire HOT?
I am building a 1950 IH fridge smoker with PID and SSR control... I've searched for hours but have yet to find any suggestions on which type of wire to use from the SSR to the heating element. My smoker is 90% complete but I am worried that the wire that I used to go from my SSR to the element...- smokinkarl
- Thread
- Replies: 11
- Forum: Fridge/Freezer Builds
-
2013-05-10_22-46-52_475.jpg
- smokinkarl
- Media item
- Comments: 0
- Album: SSR to heating element wire HOT?
-
2013-04-24_17-23-50_629.jpg
- smokinkarl
- Media item
- Comments: 0
- Album: SSR to heating element wire HOT?
