Toggle sidebar

Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. quackerspaniel

    Plywood Smoker with PID Controller

    Either way I think it is important that I use a shorter cord. I didn't really realize the drop that I was seeing across the cord. Here is a chart that breaks it out. http://home.mchsi.com/~gweidner/extension-cord-chart.pdf I'm loosing 1.5 - 4 Volts across the 40ft cord when I should be loosing...
  2. quackerspaniel

    Plywood Smoker with PID Controller

    I will try shorter cord. I did not run both plates on one cord I would run them off two. I have an extra SSR hanging around and I have another cord that I was using in test. I believe both cords are 14g. I highly doubt they are 12. I will see if it is printed on either cord. Maybe it is a 16...
  3. quackerspaniel

    Plywood Smoker with PID Controller

    I bought some firebricks to line the bottom of the smoker then I picked up some radiant barrier insulation that is A/1 fire rated. I was going to look at adding this to the inside of the smoker box on the bottom and possible lining the outside with it. I'm not sure exactly. I will see once it...
  4. quackerspaniel

    Plywood Smoker with PID Controller

    I tested it with the thermal limit switch soldered shut last night. It got up to 170 in 20 min. After another 25 min it only ever reached 175 deg. So I am in need of additional heat. I looked at the brinkmann element you mentioned. That might work but I am wondering if I need more than an...
  5. quackerspaniel

    Plywood Smoker with PID Controller

    Apparently the issue is related to the Thermal limit switch. I'm going to try and override this and see if I can get some higher temps.  
  6. quackerspaniel

    Plywood Smoker with PID Controller

    I am actually hoping to do some cold smoking as well as some hot smoking with this one. The chimney out the top has a removable cap and I was going to try and run a dryer vent hose form it to another box to cold smoke. I have to get this one to work first though.
  7. quackerspaniel

    Plywood Smoker with PID Controller

    Here are some more pictures with some close ups of what I have done. The Roof View of the Front The inside. Three levels of racks with 2 11x17 cooling racks on each level. 1" dowel slots to hang sausages from. 1000W hot plate 900 W hot plate RTV Silicone caulk to seal the...
  8. 2013-04-29 19.52.28.jpg

    2013-04-29 19.52.28.jpg

    • quackerspaniel
    • Media item
    • Comments: 0
    • Album: Plywood Smoker with PID Controller
  9. 2013-04-29 19.51.05.jpg

    2013-04-29 19.51.05.jpg

    • quackerspaniel
    • Media item
    • Comments: 0
    • Album: Plywood Smoker with PID Controller
  10. 2013-04-29 19.50.58.jpg

    2013-04-29 19.50.58.jpg

    • quackerspaniel
    • Media item
    • Comments: 0
    • Album: Plywood Smoker with PID Controller
  11. 2013-04-29 19.50.46.jpg

    2013-04-29 19.50.46.jpg

    • quackerspaniel
    • Media item
    • Comments: 0
    • Album: Plywood Smoker with PID Controller
  12. 2013-04-29 19.50.38.jpg

    2013-04-29 19.50.38.jpg

    • quackerspaniel
    • Media item
    • Comments: 0
    • Album: Plywood Smoker with PID Controller
  13. 2013-04-29 19.50.01.jpg

    2013-04-29 19.50.01.jpg

    • quackerspaniel
    • Media item
    • Comments: 0
    • Album: Plywood Smoker with PID Controller
  14. 2013-04-29 19.49.43.jpg

    2013-04-29 19.49.43.jpg

    • quackerspaniel
    • Media item
    • Comments: 0
    • Album: Plywood Smoker with PID Controller
  15. 2013-04-29 19.49.17.jpg

    2013-04-29 19.49.17.jpg

    • quackerspaniel
    • Media item
    • Comments: 0
    • Album: Plywood Smoker with PID Controller
  16. 2013-04-29 19.49.10.jpg

    2013-04-29 19.49.10.jpg

    • quackerspaniel
    • Media item
    • Comments: 0
    • Album: Plywood Smoker with PID Controller
  17. 2013-04-29 19.48.57.jpg

    2013-04-29 19.48.57.jpg

    • quackerspaniel
    • Media item
    • Comments: 0
    • Album: Plywood Smoker with PID Controller
  18. 2013-04-29 19.48.50.jpg

    2013-04-29 19.48.50.jpg

    • quackerspaniel
    • Media item
    • Comments: 0
    • Album: Plywood Smoker with PID Controller
  19. quackerspaniel

    Plywood Smoker with PID Controller

    As I mentioned in this post: http://www.smokingmeatforums.com/forum/newestpost/83549 I am having some trouble with getting the temperature to where I need it. I have two hot plates 1000W and 900W and without modification they don't seem to be able to do the job. I think my options are: 1...
  20. quackerspaniel

    Home made smoker hotplate question

    I am making one and I have 2 hot plates right now. A 1000W Hot Plate i bought here...
Top Bottom
Back
Clicky