Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. haus of smoke

    Two-Compartment Stainless Steel Commercial Sink with LARGE Left-hand Drainboard.

    Two Compartment Stainless Steel Commercial Sink with One Left-hand Drainboard. You will not find any new sink with this sort of Heavy Gauge Stainless Steel Construction, a 43" Wide Drain Board supported by a third set of all Stainless Steel cross-braced legs, and Solid Brass Drains and...
  2. haus of smoke

    Vertical Propane Smoker Rebuild

    Propane smoker update.  The burner I had made works good, but it is difficult to light if it goes out. The flame does not go all the way around. I have to light each section of pipe if the flames are low. The people at Tejas Smokers told me they sold a mess of these pipe burners because of...
  3. Vertical Propane Smoker Rebuild

    Vertical Propane Smoker Rebuild

  4. IMG_1453_SmokerPorkTall2048.jpg

    IMG_1453_SmokerPorkTall2048.jpg

    • haus of smoke
    • Media item
    • Comments: 0
    • Album: Vertical Propane Smoker Rebuild
  5. grill1k.jpg

    grill1k.jpg

    • haus of smoke
    • Media item
    • Comments: 0
    • Album: Vertical Propane Smoker Rebuild
  6. grill1a_pilot_burner_lit.jpg

    grill1a_pilot_burner_lit.jpg

    • haus of smoke
    • Media item
    • Comments: 0
    • Album: Vertical Propane Smoker Rebuild
  7. haus of smoke

    Vertical Propane Smoker Rebuild

    I've changed my mind on the 10 psi regulator size. Spent the last few weeks smoking in very cold air temps and having a 20 psi regulator would certainly bring the smoker up to temp quicker. 
  8. haus of smoke

    Latches for doors on smoker

    They be called Toggle Clamps http://www.harborfreight.com/catalogsearch/result?q=toggle+clamps White lithium grease seems to work best at keeping them working smoothly.
  9. Latches for doors on smoker

    Latches for doors on smoker

  10. haus of smoke

    Latches for doors on smoker

    Many thanks for the handle ideas! Now I can open and close my vertical smoker with just my elbow and knee! And the door fits much tighter. Tip: if you must drill a hole in your smoker and want to avoid the possibility of metal filings flying everywhere, Pull all the racks out firstApply a...
  11. KneeHandle.jpg

    KneeHandle.jpg

    • haus of smoke
    • Media item
    • Comments: 0
    • Album: Latches for doors on smoker
  12. ElbowHandle.png

    ElbowHandle.png

    • haus of smoke
    • Media item
    • Comments: 0
    • Album: Latches for doors on smoker
  13. haus of smoke

    Vertical Propane Smoker Rebuild

    Number 10 cans covered tightly with foil with small holes sitting on the corners of the pipe burner and, depending on what I am smoking, filled with hickory/apple chips or hickory sawdust. Final configuration will have a removable firebox for cooking only with charcoal/wood when desired.
  14. haus of smoke

    Flock of Turkeys - with Q-view

    Thanks for all the great comments! Sorry, rough iPhone photo.
  15. TurkeyInThePan.png

    TurkeyInThePan.png

    • haus of smoke
    • Media item
    • Comments: 0
    • Album: Default
  16. haus of smoke

    Flock of Turkeys - with Q-view

    My first post here in the Poultry forum - complete with Q-View. A week late, but I've been busy.
  17. TurkeysInTheSmoker.jpg

    TurkeysInTheSmoker.jpg

    • haus of smoke
    • Media item
    • Comments: 0
    • Album: Default
  18. haus of smoke

    Vertical Propane Smoker Rebuild

    No. A friend of mine fabricated the racks and I added the guides. The cabinet itself was built in 1957 as basically a rack mounted server cabinet...before there was such a thing. It housed some serious vacuum tube powered stuff (a Pulse Height Analyzer) that required very direct cooling - it was...
  19. TurkeysInTheSmoker.jpg

    TurkeysInTheSmoker.jpg

    • haus of smoke
    • Media item
    • Comments: 0
    • Album: Default
  20. haus of smoke

    Vertical Propane Smoker Rebuild

    A shot of my interlocking heat diffusers/grease flashing and temporary water tray.
Top Bottom
Back
Clicky