Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. clinchmtnbbq

    Reverse Flow Build

    Here is what I have done since last post. Welded on the counter weights (still need to add weight inside of them) Grates for the 250 gal tank (still need to weld handles on) Door handles are welded on ( going to do a little woodturning for the handles) Warmer/smoker tank is tacked on ( lots left...
  2. clinchmtnbbq

    Weekend#6 Project Fatman with (pics)

    Awesome looking Build! cool cam locks I orderd 6 last week for my build, mine operate like the one on your firebox. looking at them in the store I was wondering about the hard rubber bumpers, think they will hold up to the heat? I was thinking they should be fine for the smoker but I plan on...
  3. clinchmtnbbq

    Forum help

    Thanks a bunch, I got it set just the way I like it now!!!!! I also changed the display to 10 posts per page and that got rid of the scroll section at the top.
  4. clinchmtnbbq

    Forum help

    I'm a member of several forums but I have never seen one setup like this one. I have tried to change the way the pages are set up but every one to me is backwards or a pain to get to the last posts that where made???? what setting do you use?
  5. clinchmtnbbq

    Reverse Flow Build

    Thanks All! Getting a lot done so far today I will have more to post Sun. scmelik, sounds like a good excuse to build one to me Get Busy!!!!!!
  6. clinchmtnbbq

    Reverse Flow Build

    Happy Fathers Day to all the Dad's on the board! Here is what I done so far this weekend. A shot of the damper with strongback's welded on. Here is a shot of it installed closed. Open Here is the Reverse Flow Plate all welded in, this took some time to complete. (drain end) Firebox end
  7. clinchmtnbbq

    How much will a Lang 84 hold???-Lotsa Pics

    Awesome Cook!!!!!!!
  8. clinchmtnbbq

    Reverse Flow Build

    Got a little more done this weekend The intake slides are ready on both sides, I can remove the bolt if I need to ever take them off and work on them. Here is a shot of the firebox ready with the door all fixed up and 3 intake holes on it. It has a 1" solid Sq strong back X welded on the...
  9. clinchmtnbbq

    Reverse Flow Build

    Yes it is! I used the 6" sprinkler pipe to get my hole cut and sized right. I picked up a piece of sch 40 6" pipe to weld on for the stack at a job last week. It's funny you tell people what I need the stuff for and they say "your building a large smoker, sure you can have it"
  10. clinchmtnbbq

    Reverse Flow Build

    Got some more done :D Worked on my firebox some, got all the intake holes drilled and the slide covers. Im going to add a few on the door also, these will be lower. Welded on my stands for the 250 gal tank to sit on. Now this was fun :shock: I had to come up with a way to get the tank...
  11. clinchmtnbbq

    Reverse Flow Build

    Here is the firebox welded up its sitting on the trailer that is partialy finished. here is a shot of my 250 gal tank with the door covers welded on a pic of my little helper! Fire grate finished. shot of it inside. Trailer tongue welded on. dampner covers welded on (this...
  12. clinchmtnbbq

    Reverse Flow Build

    Funny question It's kinda both, Im always working on something so they are use to it. Guess they just wanted to see all that water splash? notice they keeped there distance, did I mention how bad it stunk?
  13. clinchmtnbbq

    Reverse Flow Build

    Thanks all! Here is a few shots of the tanks after I tacked on the hinges and finished cutting out the doors. the middle section also lifts up for total access for the slide out grates. Close up of the hinges, they are just tacked on at this point and have room for the door covers to be...
  14. clinchmtnbbq

    Reverse Flow Build

    I am working on my build now and have a pretty good start. I have a lot of pics but don't know if i should post them all at once or spread them out in the next few days? so I will start by telling you this will be a reverse flow build close to a Lang style with a warmer/smoker. I searched for a...
  15. clinchmtnbbq

    Tender Quick

    Thanks A bunch All! And thank you Hank, I will have to look around for those and try from scratch!!!!!!
  16. clinchmtnbbq

    Tender Quick

    where do you get yours?
  17. clinchmtnbbq

    Hello from SW Virginia

    I am curently working on a smoker build, its a reverse flow style pit. I am using a 250 gal propane tank for my main smoking chamber and it will also have a warmer/cooking chamber above the firebox that is around an 80/100 gal tank. I hope to have it complete in the next month or so. Jim
Top Bottom
Back
Clicky