Search results
-
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
-
24" 3/8" wall pipe 45" smoker * now with some que view!
CC? Lost me there. Which measurement we're you referrimg to? Teltru is who I had looked hardest at so far… figuring on needing an ash pan in it to make it easier to run the thing. I do know while operating my wood stove in shop even as old and leaky as it is I get a pretty clean burn in it but...- kfd518
- Post #10
- Forum: Reverse Flow
-
24" 3/8" wall pipe 45" smoker * now with some que view!
Makes plenty of sense. Also one other question, what I have figured is roughly 6300 CI on fire box as designed curently which is about 98.5% of what you have recomended at 6400CI should this make much difference ? Just winding as the missing size equates to a little less than a 5" cube. What...- kfd518
- Post #8
- Forum: Reverse Flow
-
24" 3/8" wall pipe 45" smoker * now with some que view!
Thank you for that calculator I have been trying to find one to work the math. Just trying to clarify what is the reason behind the upper inlets? More complete burn of fuel gasses and better draft?- kfd518
- Post #6
- Forum: Reverse Flow
-
24" 3/8" wall pipe 45" smoker * now with some que view!
Using what I have available for the most part, 3/8" is expensive stuff. No scrap yards around here selling out of the yard anymore makes used not an option. 60" is much more smoker than I will ever need either. Right now I've got it figured to where all major parts needed will be coming out of...- kfd518
- Post #4
- Forum: Reverse Flow
-
24" 3/8" wall pipe 45" smoker * now with some que view!
- kfd518
- Album
- Comments: 0
-
24" 3/8" wall pipe 45" smoker * now with some que view!
Looking to build a 45" smoker out of above mentioned pipe. Length as brought to me is 60". Attached bellow are rough draft drawings for box will be made from the 15" cut off all plate parts will be cut out of 1/4" steel except top of fire box which will be 1/2" plate. Top of warmer box will be...- kfd518
- Thread
- Replies: 35
- Forum: Reverse Flow
