Toggle sidebar

Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. ryans01z28

    Fine tuning Mypin PID T-Series Question

    Here is what it reads when it’s an ice water. I’m kind of scrambling right now because I have these eggs in here
  2. ryans01z28

    Fine tuning Mypin PID T-Series Question

    How do I change from C to F? I got this switched over but some stuff is way wrong
  3. ryans01z28

    Fine tuning Mypin PID T-Series Question

    Got it already. Hooking wires up now
  4. ryans01z28

    Fine tuning Mypin PID T-Series Question

    Thanks for the reply. I found the instructions last night after i posted this. I think that’s all I to hook up is the ssr connections and power
  5. ryans01z28

    Fine tuning Mypin PID T-Series Question

    I received my new auber pid today and just wanted to make sure I’m hooking it up correct so I don’t fry it Pin 1&2 obviously are power in Pin 6-10 are self explanatory Now do I need a jumper wire form pin 11 to 13 or do I not need to do anything with the rest of the pins? SYL-2362 is the pid...
  6. ryans01z28

    Fine tuning Mypin PID T-Series Question

    I did just that today and ordered one up. Thank you
  7. ryans01z28

    Fine tuning Mypin PID T-Series Question

    I’m not so sure mine does and the directions are not very clear.I am going to order up one of those auber PID’s so at least I have local support if I need it besides the forum
  8. ryans01z28

    Fine tuning Mypin PID T-Series Question

    Also do you know what auber pid would work good for me. Auber SYL-1512A? I’m going to order one
  9. ryans01z28

    Fine tuning Mypin PID T-Series Question

    I candled the eggs tonight with my boy and kinda had a hard time getting the temp stable. Had to hit auto tune several times and open it up to let some heat out but think it’s stable now. I don’t think I have another ssr A 25A ssr is plenty big right?
  10. ryans01z28

    Fine tuning Mypin PID T-Series Question

    How do you do a default reset??
  11. ryans01z28

    Fine tuning Mypin PID T-Series Question

    I hope when I get home tonight I have a new one there because I wanted to candle my eggs tonight so that would be a good time to swap it out
  12. ryans01z28

    Fine tuning Mypin PID T-Series Question

    Right. I’m going to hook up another pid when these are done. I think the other thermocouple I tried had a 220* off set
  13. ryans01z28

    Fine tuning Mypin PID T-Series Question

    I can’t do it now. I will have to wait for 20 days now
  14. ryans01z28

    Fine tuning Mypin PID T-Series Question

    No I didn’t try boiling water.
  15. ryans01z28

    Fine tuning Mypin PID T-Series Question

    I believe so??
  16. ryans01z28

    Fine tuning Mypin PID T-Series Question

    Yes that is the adjustment I made to calibrate it. I put the thermocouple in ice water and set the off set. Then I set it up in my incubator and had 2 thermometers inside and I calibrated it to the mercury thermometer. I have not tried my other pid from my smoker. I do however have 1 new one...
  17. ryans01z28

    Fine tuning Mypin PID T-Series Question

    Kinda looks something like this. I have a electronic humidity controller that turns a heated humidifier on. I’m waiting for a cool mist one because I think that will be a Better option. I’m able to hatch 213 eggs a 1 time but just have 1 rack in right now. The rack is set up on a timer to turn...
  18. ryans01z28

    Fine tuning Mypin PID T-Series Question

    I know how the offset works I guess and I don’t see anything wrong there?? I just adjust to correct it like you explained. As far as a stamp on the probe I do not see one on the other probe I have and the chances of me getting 2 wrong probes are slim to non. They are k type probs. It did...
  19. ryans01z28

    Fine tuning Mypin PID T-Series Question

    I had to open my incubator to grab my thermometer in there and after I closed it the temp hit 107* which it should never be at so there is something that is not right with this pid yet
  20. ryans01z28

    Fine tuning Mypin PID T-Series Question

    Yea it seems to be working so idk. Why is that value weird?
Top Bottom
Back
Clicky