Toggle sidebar

Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. kam59

    New 500 gallon RF trailer build

  2. kam59

    New 500 gallon RF trailer build

    A single door and counter weight it or build out and do two square doors that swing out.
  3. kam59

    New 500 gallon RF trailer build

    You could do a 50" wide door that is what I have on Bahama Mama.
  4. kam59

    New 500 gallon RF trailer build

    What is the horizontal distance between the dome welds. IE how long a door could you have? The 12.26 is the distance between the top of your 2" bridge and your top cut. Crude drawing but it works lol. 17.66" should be about the width of your bridge. 37.875 should be about the width of your...
  5. New 500 gallon RF trailer build

    New 500 gallon RF trailer build

    • kam59
    • Album
    • Comments: 0
  6. Untitled.png

    Untitled.png

    • kam59
    • Media item
    • Comments: 0
    • Album: New 500 gallon RF trailer build
  7. kam59

    New 500 gallon RF trailer build

    Good looking trailer Eighty Second I like it. :)  Here is what I came up with on the calculator based on your tank dimensions. Link to BBQ Pit Calculator For your firebox to cooker chamber opening look at this. 37.875Top width of cut-out.: 17.664Bottom width of cut-out: 12.268Height of...
  8. kam59

    Pork belly smoker

    Nice looking smoker. :)  I noticed the position of your hinge point appears to be right over your top door cut. If you plan on using outside door flanges they may hit on the top when you try to open the door.
  9. kam59

    Uds stopped overnight

    Good luck I hope adding the exhaust helps. :)
  10. kam59

    Greetings / Compressor Tank Build

    Heck yeah!!! :) You are getting the hang of that stick now brother. :) Your firebox looks great. 
  11. kam59

    Uds stopped overnight

    So you need to ask yourself what the difference was in the two cooks. You maintained 325° to cook birds but on this butt you had all intakes open and were maintaining 225°.
  12. kam59

    Uds stopped overnight

    Is this your first cook on this drum? The reason I ask is I looked at your pic and I see you have two what appears 3/4" exhausts. That may not be enough exit air to maintain combustion in the drum.  The lump or charcoal question was if charcoal your burning coals may have suffocated in their...
  13. kam59

    Uds stopped overnight

    Lump or charcoal?
  14. kam59

    1st smoker build - 140 gallon

    Everything looks great keep us posted. I reference Pete's calculators a lot they are a great tool to have.
  15. kam59

    Started building my first reverse flow pit this weekend. Here are some pictures of the progress. 20"

    Your cooker came out Great MadDog I like it. :) You are very welcome brother it was my pleasure. Awesome way to season her up enjoy. :)
  16. kam59

    Offset build with 34in diameter pipe

    It may not give you everything you need but it will be a healthy start. :)
  17. kam59

    500 gallon

    Do a 10" diameter 30 tall.  Here is a link to the calculator with a 36" square firebox. Link to BBQ Pit Calculator
  18. kam59

    Offset build with 34in diameter pipe

    Just block up the trailer cut the axle loose and re-position the hangers. Worse case you will need a new set of hangers.
  19. kam59

    Offset build with 34in diameter pipe

    Great looking cooker I like it. :) From the pic it appears you have zero tongue weight. You could move the axle as far back as you can this will help some.
  20. kam59

    My first attempt at a build.

    Your welds look fine to me. Unless you are wanting full penetration a gap is not necessary in your vee weld. If you want a "Clean no weld" look then grind down your welds you are thinking correctly by creating the vee to allow enough penetration so that you can clean up your weld but still...
Top Bottom
Back
Clicky