Toggle sidebar

Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. slider n copa

    Home made convection plate for Brinkman Trailmaster LE

    Hey PPLE; I have seen alot of mods like this, Most I have see are angled on the end near the FB. From what I read the way u installed yours you have cut off about half the inlet. My question is wont that cause heat to build up in the FB burning it out faster and causing u to use more fuel...
  2. slider n copa

    Trailmaster Reverse Flow?

    Chickenhead; Moving the stack is obvious, But IM curious was it really necessary to lower the fire box? I have been kicken the idea around for awhile I just picked up my TMLE, Still have to make up my mind if IM gonna make an RF or just put a baffle at the FB end. Nice work by the way. Never...
  3. slider n copa

    Brinkmann Trailmaster Limited Edition

    Picked mine up at HD a couple weeks ago for 267.00. Put it together myself with no problem, Used silicon to seal the seams. Didn't find anything bent or warped. Would have like a little wider lip for door seal but it is enough, For the door seals, I use 2 to 3 pieces of heavy wire to gap the...
  4. slider n copa

    Has anyone used the Maverik hybrid probe?

    Yes they work no different
  5. slider n copa

    Tri Tip question

    I just did my first Tri TIp, I found it on sale in a bag marinade applied. I smoked it with apple at 200, Shoulda finished it on the grill, I pulled it at 135, Wrapped in foil and a beach towl and let it rest for about 3 hrs,,,,, Very tender, Won't get another in a bag like that. I use y own...
  6. slider n copa

    London Broil to pulling stage?

    IM thinkin use a tenderizer that punches holes in it.Marinade in apple juice, vinagar and some eevo and a bouillon cube. Punch holes all over both sides, Put it in a bag for a day or 2 turning it over every 12 hrs. Take it out and let it warm up to room temp. IM gonna cover the topside with...
  7. slider n copa

    London Broil to pulling stage?

    I have done one to 200 @ 225, I didn't wrap it or cover it with bacon, Tasted great but wasn't as tender as I expected.
  8. slider n copa

    Masterbuilt propane smokers

    Lookin Good
  9. slider n copa

    SMOKING IN MESA!!!

    Hello, IM im Maricopa
  10. slider n copa

    Masterbuilt propane smokers

    Enjoy
  11. slider n copa

    Square vs Round

    Nice Job
  12. slider n copa

    Brisket for one?

    ,
  13. slider n copa

    Brisket for one?

    Igor, I have smoked many flats 6 to 7 lbs, I inject with 1/3 ea of apple juice, vinagar and bouillon. I try to hold at 230 or a little below, I smoke with apple blocks, I use a Maverick dual probe, Water or juice in the water pan. I have always gone fat side up. I keep smoke on it till About...
  14. slider n copa

    Square vs Round

    Jabbo, DaveOmak posted a rough drawing, I like it, Years ago I used to work in a Heat Treating Facility and did the maint and requal uniformity surveys. The more uniform you can make something the better the uniformity of the heat zone. It was amazing to see what little change in air flow would...
  15. slider n copa

    Masterbuilt propane smokers

    I have a pair of chnnel locks that work great for grabbin the skillet
  16. slider n copa

    Square vs Round

    I like the idea, Seems like the temp would be more uniform across the width of the cooking shelf. The door could hing at the top with an over center brace on each side. Or 2 doors that open out one with a lip for the other to seal aginst.
  17. slider n copa

    Masterbuilt propane smokers

    Actually, I think you have the issue reversed, I think it is too rich and needs more air. Check your burner to make sure there are no restrictions, Just my thoughts
  18. slider n copa

    Masterbuilt propane smokers

    Some have used the old chip pan to hold the skillet, I used an old grate i had on hand and some pipe couplings for stands to keep it above the burner openning
  19. slider n copa

    How to properly extinguish an AMNPS or AMNTS

    I had the same thought.
  20. slider n copa

    Masterbuilt propane smokers

    I ditched the MB chip right away,, And went with a cast iron skillet. I have a buddy lookin into gettin into smokin. So I went out lookin at models I thought he would like and I ran into a Master Forge unit about the same size as mine that I woulda jumped on in a heart beat. the shelves are the...
Top Bottom
Back
Clicky