Search results
-
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
-
M
MES Rewire Simple Guide - No Back Removal Needed!!!
Awesome. Thank you. I've been slowly reading through this thread and a lot of my previous questions had already been answered - so, I'm sorry for that. I setup the PID/wifi/app today. I'll test everything tomorrow. I wanted to wait until things were dry. I did an internal clean and pulled some...- moussaka
- Post #395
- Forum: Electric Smokers
-
M
MES Rewire Simple Guide - No Back Removal Needed!!!
I decided to just solder the wires together instead of messing with connectors for this. Chances are I'm never going to disconnect this portion of it anyways. I need to do some internal cleaning and maybe later today I'll plug it into the AW-1520H and see if anything blows up. Is there an easy...- moussaka
- Post #393
- Forum: Electric Smokers
-
M
MES Rewire Simple Guide - No Back Removal Needed!!!
So, on mine, what're the other things attached to the board with the smaller wires? Lights? I've actually never even plugged this in because the control panel on top is completely disintegrated and I don't know what any buttons do. I got this for free and heating elements are cheap enough (if...- moussaka
- Post #391
- Forum: Electric Smokers
-
M
MES Rewire Simple Guide - No Back Removal Needed!!!
I bought a AW-1520H. Working on the rewire now following Auber's .pdf guide. For the jumper, they suggest 14awg stranded wire. I have 12awg solid wire on hand. Will this be a problem? Would it be better to just cut one of the female connectors off the pre-installed wires and crimp a male spade...- moussaka
- Post #389
- Forum: Electric Smokers
