Toggle sidebar

Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. lendecatural

    120 Gallon Trailer Build

    Check the big green egg seals on eBay,  eBay item number: 181264596085 They are 15' long for $14 delivered, dims 7/8" x 1/8" and adhesive backed nomex. She might not notice!!!!  1/8" thick should be small enough not to spring against your hinges but still give you a good seal, worth a shot...
  2. lendecatural

    **New Member = First Reverse Flow Smoker Build from 60 Gallon Compressor Tank**

    That's why they say "you have to make hay while the sun is shining" You will have time and money soon enough.  
  3. lendecatural

    120 Gallon Trailer Build

    How air tight is your firebox including the vent cutouts? The PID should be able to hold that range in steady state if it isn't working against leaks.
  4. lendecatural

    Painting the CC and FB

    Don't worry about the inside of the firebox, you don't want the taste of burnt paint on your food. Eastwood usually has good products, I've used their stuff restoring cars in the past. Used some of their header paint that held up well so I assume it is the same base material. 
  5. lendecatural

    Go big or go home!

    That is one big build for sure!! May as well get your brother to teach you some tricks while this is going on, you guys are making great progress. 
  6. lendecatural

    120 Gallon Trailer Build

    Looks beautiful!! How well did your controller maintain temperature? How often did you have to load more wood?
  7. lendecatural

    Finally starting my first build

    You had a good day! I would suggest doing the season and then cooking on it. The best way to see if you need changes is to crank out some meat and have a taste, if it is good, then paint it and call it good.
  8. lendecatural

    120 gal. build -New Member-

    That sure will make for some easy welding by not having to fight the rust!
  9. lendecatural

    need help with my reverse flow design please

    http://www.smokingmeatforums.com/t/172425/standard-reverse-flow-smoker-calculator-by-daveomak-and-others-ready-to-use-rev-4d This is the link you should use to do the calculations, read the full posting and do the calculations in the first post. There are problems with Feldon's when used for...
  10. lendecatural

    Another New member with a 60 gallon build

    Looks very nice, you did a great job on that smoker!
  11. lendecatural

    questions for the smoking God's

    It did turn out very nice and it should be very efficient. Great job!
  12. lendecatural

    buildfor dannyp (few question) bare with me

    Lawd have mercy... that is a sure cure for having to figure out what to do with leftovers!
  13. lendecatural

    buildfor dannyp (few question) bare with me

    Great job!! The most important thing is that you can cook with it, ie, you understand how it works and how she responds. You will get many years of joy and spread lots of smiles with that girl.
  14. lendecatural

    120 gal. build -New Member-

    I'm out of town on the South Carolina coast, did someone say Road Trip???
  15. lendecatural

    New build tuning questions

    That would be perfect!!! Great Job.
  16. lendecatural

    Need CC gasket advice

    Ribwizard posted up a method of using stretch wrap and RTV to mould a gasket in place.
  17. lendecatural

    Exhaust wall thickness???

    Yes, check the fab shops, they will have drops from sheets that are sold for scrap value so if you offer more, you are in business. Exhaust tubing is good, check where they do diesel exhaust, usually 5 and 6" there. Check out Cracksmoker's thread, he's sitting on a goldmine..... and at least in...
  18. lendecatural

    The 'Scrap' build.

    Welcome Cracksmoker, Good job! All I can see you will need to buy is a couple of thermometers and maybe some wheels. It is fine for the RF plate to be that height above the grate. Did you use Dave's tutorial to do your calculations? 
  19. lendecatural

    250 Gallon Reverse Flow FIRST BUILD!!!

    Use the hand calculations Dave put together here: http://www.smokingmeatforums.com/t/172425/standard-reverse-flow-smoker-calculator-by-daveomak-and-others-ready-to-use-rev-4 The CC/FB measurement is the problem with Feldons as well as the fact that it is firebox not cook chamber based...
  20. lendecatural

    250 Gallon Reverse Flow FIRST BUILD!!!

    Go with the 8" and 28-30", you need some height to produce draft.
Top Bottom
Back
Clicky