Search results
-
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
-
2 chamber Reverse Flow
Nice lil tip Ribwizzard, thank you. All my holes are drilled but will toss it in memory bank. Any input on a method for lighting the burners? I'm thinking a few possibilities..... 1 - installing a track that the base plates can fit in, have a rod that I can pull burner to the side, cutting a...- kaizerscall
- Post #93
- Forum: Reverse Flow
-
2 chamber Reverse Flow
Got a little bit done today. All the ports are drilled on the two for the cooking chambers, and I sliced the ones for the log lighter. It really was touchy drilling with a 1/16th bit but I got the hang of it. About halfway through I remembered someone suggesting to give each location a...- kaizerscall
- Post #91
- Forum: Reverse Flow
-
2 chamber Reverse Flow
Got a little bit done today. All the ports are drilled on the two for the cooking chambers, and I sliced the ones for the log lighter. It really was touchy drilling with a 1/16th bit but I got the hang of it. About halfway through I remembered someone suggesting to give each location a...- kaizerscall
- Post #90
- Forum: Reverse Flow
-
IMG472.jpg
- kaizerscall
- Media item
- Comments: 0
- Album: 2 chamber Reverse Flow
-
IMG471.jpg
- kaizerscall
- Media item
- Comments: 0
- Album: 2 chamber Reverse Flow
-
IMG468.jpg
- kaizerscall
- Media item
- Comments: 0
- Album: 2 chamber Reverse Flow
-
2 chamber Reverse Flow
I started puttering around with Pipe Burners. Started with sketching on some scrap so I could get a visual and also put together a stock list...... Doing a 24" burner in each CC and a 16" for log lighter. Using 1 " pipe Cut some 4x4 1/8" for base plates, come up with using 3/8 bolts to...- kaizerscall
- Post #88
- Forum: Reverse Flow
-
2 chamber Reverse Flow
I started puttering around with Pipe Burners. Started with sketching on some scrap so I could get a visual and also put together a stock list...... Doing a 24" burner in each CC and a 16" for log lighter. Using 1 " pipe Cut some 4x4 1/8" for base plates, come up with using 3/8 bolts to...- kaizerscall
- Post #87
- Forum: Reverse Flow
-
IMG467.jpg
- kaizerscall
- Media item
- Comments: 0
- Album: 2 chamber Reverse Flow
-
IMG466.jpg
- kaizerscall
- Media item
- Comments: 0
- Album: 2 chamber Reverse Flow
-
IMG465.jpg
- kaizerscall
- Media item
- Comments: 0
- Album: 2 chamber Reverse Flow
-
-
IMG460.jpg
- kaizerscall
- Media item
- Comments: 0
- Album: 2 chamber Reverse Flow
-
2 chamber Reverse Flow
One last view of work from today on Firebox. Now this is the extension I was explaining yesterday........ I just put a couple tacks on it, just so I could get a visual of how it would look. I'll be taking it down to square and dress it up, it was late in the day and ran out of time. I...- kaizerscall
- Post #83
- Forum: Reverse Flow
-
IMG457.jpg
- kaizerscall
- Media item
- Comments: 0
- Album: 2 chamber Reverse Flow
-
IMG461.jpg
- kaizerscall
- Media item
- Comments: 0
- Album: 2 chamber Reverse Flow
-
IMG456.jpg
- kaizerscall
- Media item
- Comments: 0
- Album: 2 chamber Reverse Flow
-
2 chamber Reverse Flow
Did all my notching by means of grinder with cutting disk today. Wasn't quite square so I had to tapper. Marked right side a 1/4 inch to nothing to where it met the corner of where inlet to warmerbox is....... A nice dry fit. Had alot of welding todo on this. Was made in three pieces to...- kaizerscall
- Post #82
- Forum: Reverse Flow
-
IMG455.jpg
- kaizerscall
- Media item
- Comments: 0
- Album: 2 chamber Reverse Flow
-
IMG454.jpg
- kaizerscall
- Media item
- Comments: 0
- Album: 2 chamber Reverse Flow
