Search results
-
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
-
SAM_0939.JPG
- cornbread
- Media item
- Comments: 0
- Album:
-
- cornbread
- Album
- Comments: 0
-
Advice needed reverse flow smoker build
Well I finally received my axle and wheel kit. Hopefully I will be able to finish the trailer this weekend. I got some shelf supports in the warming box and decided to put a double wall in the FB. Hopefully everything I am reading is good and it will help with the heat retention and be more...- cornbread
- Post #13
- Forum: Smoker Builds
-
Advice needed reverse flow smoker build
The CC is 36x 72 and I have not cut the FB CC opening yet. I wanted to get it on the trailer and double check my math on how it is going to sit. Measure twice cut once.- cornbread
- Post #12
- Forum: Smoker Builds
-
Advice needed reverse flow smoker build
I tried to make a drawing I guess I am asking if the RF plate needs to be like drawing 1 or drawing 2- cornbread
- Post #10
- Forum: Smoker Builds
-
- cornbread
- Album
- Comments: 0
-
- cornbread
- Album
- Comments: 0
-
Advice needed reverse flow smoker build
Ok thanks that makes sense. Not sure about the height of the RF plate from bottom of CC and distance to cook grate- cornbread
- Post #8
- Forum: Smoker Builds
-
My first smoker build
She is between Corbin and New London not to far we go there every few months- cornbread
- Post #124
- Forum: Reverse Flow
-
My first smoker build
Thanks for the info I will go thicker I have both sizes not far from ky my sister lives there but I am too far into this one to buy one I have a friend that wants to buy one I will ask him think about a price because the size you built is what he is looking for- cornbread
- Post #122
- Forum: Reverse Flow
-
offset smoker tuning plates vs reverse flow
Hey Ribwizard I must have made a typo my firebox is a little bit oversized . I have been thinking about the end cap my cylinder that I rolled is 36" in dia I have a propane tank that is 30" in dia I am going to cut it and either weld it on the end or split it open by about 20 cuts and open it to...- cornbread
- Post #48
- Forum: Wood Smokers
-
Advice needed reverse flow smoker build
Thanks Crazy Q I did get my measurements from the pit calculator so I guess the sizes will be close. I figured what you said would be the best way but you see so much on here its hard to tell what to do sometimes. Is it better to have 1 flue or 2 shorter ones it seems like 2 would draft better...- cornbread
- Post #5
- Forum: Smoker Builds
-
Advice needed reverse flow smoker build
yes its rectangular tube I actually got it cheaper than angle. It was $175.00 for 3 stks 24-0. The box is a firebox and warming box combo and the tank I rolled from 1/4" steel it is 3-0 dia x 6-0 long- cornbread
- Post #4
- Forum: Smoker Builds
-
Advice needed reverse flow smoker build
Hi I have been working on a new smoker. I want to build a reverse flow. I have started a little of everything but I have some questions about the RF plate and the FB. For the plate I am planning to put the angle in the middle for the grease drain. Should the plate go straight across and tip the...- cornbread
- Thread
- Replies: 29
- Forum: Smoker Builds
-
My first smoker build
Do you feel like the 1/8 metal thickness has been ok for your heat retention? I have a 1/8 thick barrel and a 1/4 thick one. Trying to decide which one to use. The 1/8 is larger for more cook surface. Just curious how that worked out for you- cornbread
- Post #120
- Forum: Reverse Flow
-
offset smoker tuning plates vs reverse flow
I finally got time to get some pics of the work. I hope everything works out. All of the fabricating has gone pretty smooth so far. I built the firebox and warming box all in one shot. It took some maneuvering to turn it by myself it weighs about 650lbs so far. Now I know why the pros do it in 2...- cornbread
- Post #46
- Forum: Wood Smokers
-
SAM_0935.JPG
- cornbread
- Media item
- Comments: 0
- Album: offset smoker tuning plates vs reverse flow
-
SAM_0936.JPG
- cornbread
- Media item
- Comments: 0
- Album:
