Toggle sidebar

Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. regularjoe

    20gal build Finially DONE

    LOL thanks Ribwazzard. I am really surprised how much time it is taking to build.
  2. regularjoe

    20gal build Finially DONE

    I left the door big so can get every square inch out of it. If I have a seal issue I planned on installing plate with a slot in it and a handle on the lid that rotates around into the slot.
  3. IMAG1116.jpg

    IMAG1116.jpg

    • regularjoe
    • Media item
    • Comments: 0
    • Album: 20gal build. UPDATE 12/20/14 Almost done.
  4. regularjoe

    20gal build Finially DONE

    Also ground down weld on the patches where the plugs where.
  5. IMAG1115.jpg

    IMAG1115.jpg

    • regularjoe
    • Media item
    • Comments: 0
    • Album: 20gal build. UPDATE 12/20/14 Almost done.
  6. regularjoe

    20gal build Finially DONE

    The tank did not burn out good enough. I will scrub it out and do it again. Today I got the, Door cut out. Hinges cut out and of 3/16 sheet. Installed hinges Installed seal around door. (I used the notching method as described in Ribwizzards thread. Worked great Thanks. Rear firebox sheet...
  7. IMAG1115.jpg

    IMAG1115.jpg

    • regularjoe
    • Media item
    • Comments: 0
    • Album: 20gal build. UPDATE 12/20/14 Almost done.
  8. IMAG1114.jpg

    IMAG1114.jpg

    • regularjoe
    • Media item
    • Comments: 0
    • Album: 20gal build. UPDATE 12/20/14 Almost done.
  9. regularjoe

    20gal build Finially DONE

    I did shome ribs today on the webber while working on the new smoker.
  10. IMAG1113.jpg

    IMAG1113.jpg

    • regularjoe
    • Media item
    • Comments: 0
    • Album: 20gal build. UPDATE 12/20/14 Almost done.
  11. regularjoe

    20gal build Finially DONE

    Sounds good. I have everything lined up to hit it again Saturday.
  12. regularjoe

    20gal build Finially DONE

     These were posted in another thread by Dave. I was planning on using this design with a piece of oak between the two for a handle. I was hoping it would help support the door plus add weight to it to help keep it sealed.
  13. hindge.jpeg

    hindge.jpeg

    • regularjoe
    • Media item
    • Comments: 0
    • Album: 20gal build. UPDATE 12/20/14 Almost done.
  14. regularjoe

    20gal build Finially DONE

    OK thanks Dave.
  15. regularjoe

    20gal build Finially DONE

    I found some 1/8 at Tractor Supply. 1in x 48  for 5.99 http://www.tractorsupply.com/en/store/national-hardwarereg%3B-4062bc-1-in-x-48-in-flat-1-8-in-plain-steel-%28yellow%29
  16. regularjoe

    20gal build Finially DONE

    When you say notch the edge every three to four inches do you mean on the smoker or the door it self. I am thinking the door and it is to make room for the weld so it does not hit on the smoker itself. I will look for the post by Ribwizzard.  I thought the flange got welded the whole way around...
  17. regularjoe

    20gal build Finially DONE

    Yes I was also thinking of the clamps to keep the door shut. This is why I did not cut anything yet, I wanted to hear your opinions. I think I have a new problem now. Once we got the hole cut for the firebox we noticed a oil in it. I think this tank was used for a  press. I left a message with...
  18. regularjoe

    20gal build Finially DONE

    Still need to grind down the welds. If you look in this pic you can see the trace out for the door. I wanted to be sure it would be ok before I cut it. I wanted a nice wide door to help with getting the top removable rack out. Does anyone see a problem making the door almost as wide as the...
  19. IMAG1098.jpg

    IMAG1098.jpg

    • regularjoe
    • Media item
    • Comments: 0
    • Album: 20gal build. UPDATE 12/20/14 Almost done.
  20. IMAG1100.jpg

    IMAG1100.jpg

    • regularjoe
    • Media item
    • Comments: 0
    • Album: 20gal build. UPDATE 12/20/14 Almost done.
Top Bottom
Back
Clicky