Toggle sidebar

Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. boomhower

    My 100 gallon reverse flow build

    Firebox reinstalled to the smoke chamber and welded.... Welded on the inside, and the last of the bungs removed from the inside of the tank and ground down.....
  2. DSC03881.JPG

    DSC03881.JPG

    • boomhower
    • Media item
    • Comments: 0
    • Album: Default
  3. DSC03882.JPG

    DSC03882.JPG

    • boomhower
    • Media item
    • Comments: 0
    • Album: Default
  4. CAD1.JPG

    CAD1.JPG

    • boomhower
    • Media item
    • Comments: 0
    • Album: Default
  5. boomhower

    My 100 gallon reverse flow build

      To cut the firebox, you can see in the 2nd picture in post #16 at the bottom of the tank where I marked the firebox with a black sharpie.  I only cut the back of the firebox.  The top of the firebox remains intact and becomes part of the reverse flow plate/water pan.  You can also see in...
  6. DSC03879.JPG

    DSC03879.JPG

    • boomhower
    • Media item
    • Comments: 0
    • Album: Default
  7. DSC03876.JPG

    DSC03876.JPG

    • boomhower
    • Media item
    • Comments: 0
    • Album: Default
  8. boomhower

    My 100 gallon reverse flow build

    Yes,  It is nice to have tools and a shop.  However,  everything I have done here, I could have done in my garage with a torch, welder, angle grinder with cutoff, and some other simple tools.  I've seen many smokers here built with those same tools in a driveway or backyard.  Tools just make my...
  9. boomhower

    My 100 gallon reverse flow build

    Marking the firebox for the firebox to smoke chamber connection.... Firebox cutout....
  10. DSC03879.JPG

    DSC03879.JPG

    • boomhower
    • Media item
    • Comments: 0
    • Album: Default
  11. DSC03876.JPG

    DSC03876.JPG

    • boomhower
    • Media item
    • Comments: 0
    • Album: Default
  12. boomhower

    My 100 gallon reverse flow build

       Never built a smoker before.   I have built lots of other stuff though.    The wheels you see now are temporary, they came with the compressor tank.  I left them on to make it easier to roll around the shop. This all gets mounted on a trailer.  Pics coming as soon as my last post gets...
  13. boomhower

    My 100 gallon reverse flow build

    Milling out the holes for the inlet vent.... Vent finished and welded on.... Closed.... Open....
  14. DSC03866.JPG

    DSC03866.JPG

    • boomhower
    • Media item
    • Comments: 0
    • Album: Default
  15. DSC03867.JPG

    DSC03867.JPG

    • boomhower
    • Media item
    • Comments: 0
    • Album: Default
  16. Photo0277.jpg

    Photo0277.jpg

    • boomhower
    • Media item
    • Comments: 0
    • Album: Default
  17. boomhower

    My 100 gallon reverse flow build

    Firebox welded up... Top, bottom, sides and back are made from 3/16" plate.  Front "frame" of firebox is made from 3/8" x 2" wide flat stock for a little more beef around where the hinges, seal, and door latch will go... Bought these hinges to use on all of the doors.... Firebox door...
  18. DSC03870.JPG

    DSC03870.JPG

    • boomhower
    • Media item
    • Comments: 0
    • Album: Default
  19. DSC03875.JPG

    DSC03875.JPG

    • boomhower
    • Media item
    • Comments: 0
    • Album: Default
  20. Photo0282.jpg

    Photo0282.jpg

    • boomhower
    • Media item
    • Comments: 0
    • Album: Default
Top Bottom
Back
Clicky