Toggle sidebar

Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. mmiller

    No flare ups with Flame Disk Bowl Masterbuilt XL:

    I found out how to use the Flame Disk Bowl without your wood catching fire. First remove the Flame Disk Bowl and allow the Smoker to reach your desired temperature. When the desired temperature is reached, open the door and insert the Flame Disk Bowl with the wood in it. Close the door and allow...
  2. mmiller

    DIY Side Table for Kettle:

    Here is photo of a side table that I made for my Weber Kettle. I used the top from my Weber 1800 Side Kick Table and mounted it onto an RV table base and used an RV pedestal Leg. I used the RV table  based called ""Porta-Leggs".  If you do not want to use the Porta-Leggs, you can use the RV cone...
  3. mmiller

    Masterbuilt discontinued Cold Smoker Kit?

    I contacted Masterbuilt and asked when would the Cold Smoker Kit be available, since it has been out of stock for the past couple of months.  The rep said they didn't know when it would be back in stock.  I asked was it being  discontinued? And was told "something like that".  The rep said that...
  4. mmiller

    Masterbuilt Cold Smoker & XL Propane Smoker

    I attached a Masterbuilt Cold Smoker onto my XL Propane Smoker. I had to make a couple of mods to both. I cut a 3" hole in the XL so that the Cold Smoker would fix. I put a baffle (thin sheet metal plate with a hole in it) on the Chip Tube Screen to reduce the amount of heat applied to the...
  5. mmiller

    A-Maze-N-Tube for Masterbuilt XL Propane Smoker

    Thanks to Todd I'm smoking now. I used stainless steel wire to mount the Tube onto a Hotel Pan Wire Grate, and used 1" steel bolts on the grate so that air could flow all around the Tube. The Tube and Grate sits on the bottom of the Smoker.
  6. mmiller

    Hello from South Carolina

    I have been a visitor on the Forum for several months and decided to join.  I use the following smokers and grills. A Masterbuilt XL Propane, 18.5 Weber Smokey Mountain, an old Brinkmann Smoke'N Pit, 18.5 Weber one touch Gold and a couple other Webers. Thanks for all your help.
  7. mmiller

    A-Maze-Tube and Masterbuilt XL Propane

    I just started using a A-Maze-Tube in my Masterbuilt XL Propane Smoker and it works like a charm. It has been smoking now for about 4 hours and still going strong. I drilled a couple 1/4" holes on the bottom left side of the smoker about 2" from the side and placed the Tube over the holes. It is...
Top Bottom
Back
Clicky