Toggle sidebar

Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. tlcpokertables

    Are wire milk crates ok to use for a UDS charcoal basket?....

    I've been trying to get quotes from local metalworkers about having a basket made from expanded metal, and their quotes are ridiculous....(The last quote I got was $145).....So I was thinking of other options and thought of a milk crate......So my question is... Are wire milk crates ok to use...
  2. Almost done with my UDS (see pic)

    Almost done with my UDS (see pic)

  3. tlcpokertables

    Almost done with my UDS (see pic)

    Almost done!!  I just need to install my split ring hangers for the 3/4" pipe on either side, and make a charcoal basket...Any feedback would be great! Thanks! ....
  4. DSCN5751.JPG

    DSCN5751.JPG

    • tlcpokertables
    • Media item
    • Comments: 0
    • Album: Almost done with my UDS (see pic)
  5. tlcpokertables

    Is my USD drum lined or unlined?!?!?

    Thanks again for the quick reply.....I'll do that!....Looks like I'll be smokin' sooner than expected! 
  6. tlcpokertables

    Is my USD drum lined or unlined?!?!?

    Worked like a charm, Dave...Thank you! I have another question for you.....Do you think using oven cleaner would help the process along, instead of sanding the inside?.......Just looking for an easy solution. I inquired to few places about sandblasting, but it looks to be well over $100...
  7. tlcpokertables

    Is my USD drum lined or unlined?!?!?

    Sounds good Dave! I will do that! Thank you! 
  8. tlcpokertables

    Is my USD drum lined or unlined?!?!?

    Thanks for the quick reply! When I got it, it had a rusty red powder on the inside. After the burnout, it seemed to have remained. However, it didn't take much to remove it with a wire wheel drill attachment. Off subject - I did happen to notice that the lid doesn't quite fit the drum like it...
  9. Is my USD drum lined or unlined?!?!?

    Is my USD drum lined or unlined?!?!?

  10. tlcpokertables

    Is my USD drum lined or unlined?!?!?

    Hi there, I just started my UDS build and did my burnout for 2-1/2 hours. Then I took a wire wheel to the inside of the drum to get it down to the bare metal (see pic). Can someone tell me if my drum is lined or not?.....Any input would be great! Thanks!
  11. DSCN5700.JPG

    DSCN5700.JPG

    • tlcpokertables
    • Media item
    • Comments: 0
    • Album: Is my USD drum lined or unlined?!?!?
  12. DSCN5699.JPG

    DSCN5699.JPG

    • tlcpokertables
    • Media item
    • Comments: 0
    • Album: Is my USD drum lined or unlined?!?!?
  13. tlcpokertables

    Starting my 1st UDS build!

    Sounds good! Good luck with yours too! Thanks for the reply!
  14. tlcpokertables

    Starting my 1st UDS build!

    Hi everyone, After a bit of research, I've decided to build my 1st UDS. I have the drum and bought most of the hardware for it. I'm about ready to burn the inside of the drum to get it any / all stuff out of it.  The drum itself appears to be in good condition.  However the entire inside has a...
  15. tlcpokertables

    My 2nd fattie! Fresh mozz, tomato and basil...

    This is my 2nd fattie! I decided to go with fresh mozz, tomato, basil and green pepper.  It came out soooooo good!
  16. CIMG4353.JPG

    CIMG4353.JPG

  17. CIMG4354.JPG

    CIMG4354.JPG

  18. CIMG4354.JPG

    CIMG4354.JPG

  19. CIMG4353.JPG

    CIMG4353.JPG

  20. CIMG4354.JPG

    CIMG4354.JPG

Top Bottom
Back
Clicky