Toggle sidebar

Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. jrbuilder

    propane tank conversion

    The protocol for cutting one that I have found is you vent the tank then fill it with water. You then cut the tank with water in it. Have been considering cutting the section that would be the fire box in half. Making a fire box that is a half moon on top and square on the bottom. That way the...
  2. propane tank conversion

    propane tank conversion

  3. jrbuilder

    propane tank conversion

    This is my idea of converting a 500 gallon propane tank. I would cut both ends of the tank off. Then cut off a 2 foot section of the main body for use as the fire box. Main question is about square versus round fire box? Any advantage disadvantage either way?
  4. 1404452163185.jpg

    1404452163185.jpg

    • jrbuilder
    • Media item
    • Comments: 0
    • Album: propane tank conversion
  5. jrbuilder

    warmers

    Okay on a lot of rigs I see warming boxes above the fire box of most reverse flow smokers. How useful are they am figuring out what I want to build and looking for advice. Am wanting to convert a propane tank ideally
  6. jrbuilder

    Rear firebox smoker build - Door issues - lots of pics! please help!!

    K I work with welders a lot and have idea. Think like you where going to patch the pipe. I would tack weld your door back in place to get it to conform so you could do what the guys at work Do cut a c clamp in half and weld the side with the thread to a thick plate they then weld it to the piece...
  7. jrbuilder

    modified triple barrel design

    I wondered about that as a possibility. Was planing on draft controls in the front and back to help with air. Considering lining whole barrel with fire brick
  8. jrbuilder

    modified triple barrel design

    Nothing on this build is set in stone yet. I figure if I can answer your questions I have done my homework lol
  9. jrbuilder

    modified triple barrel design

    Input is why I posted and I thank you for it. Cold spot has come up in my research and supposed to me not a problem
  10. jrbuilder

    modified triple barrel design

    True on losing some heat but convenience would be nice. From what I have picked up is you put a rack on the bottom and place drip pans which act as a diffuser
  11. jrbuilder

    275 gallon RF Flame Smoker Completed

    Had a thought what if you used the fuel oil drum as just the food chamber and then a 55 gal drum on the side as a fire box
  12. jrbuilder

    newbie message

    Posted a picture of my idea on the build forum. Hoping for some feed back before I start
  13. modified triple barrel design

    modified triple barrel design

  14. 1403284419113.jpg

    1403284419113.jpg

    • jrbuilder
    • Media item
    • Comments: 0
    • Album: modified triple barrel design
  15. jrbuilder

    modified triple barrel design

    Planing on building a smoker. I like the triple barrel design but have a idea to modify it. Would like your opinions. I think by turning the bottom barrel 90 degrees to the top ones will make fueling easier plus it does look cool
  16. jrbuilder

    newbie message

    From southern Illinois I use a side fire box smoker that has died this year. Smoker did give me years of difficult service. Your site helping me plan on a better rig that I plan to build
Top Bottom
Back
Clicky