Toggle sidebar

Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. ahumadora

    First time Patio RF build from down under

    Very clean build.Nice work. Note to pit builders here.   Much easier to cut a hole for square stack with a grinder than round. post some food pics!
  2. ahumadora

    Smoker build Welder under $500??

    Good info from socal cooker.   3 n1 are crap.   Buy something semi decent and it will last for years or you can resell it after the job. Here I done a quick search for you   https://saltlakecity.craigslist.org/tls/d/lincoln-mig-welder-140c/6242868517.html   a little small but will still work...
  3. ahumadora

    Help with my smoker!

    Hola, good advice above from the guys You should be able to find some 100x100x 1.6mm o (2mm)  square tube that will work fine for exhaust. Search for a local chatara (scrap dealer) and you should be able to pick up some square tube or even  4.75 0 6mm (3/16  or 1/4") plate  to work on a new...
  4. ahumadora

    Reverse Flow smoker build need help including calculations

    Here's some ideas you may want to think about.
  5. Reverse Flow smoker build need help/advice

    Reverse Flow smoker build need help/advice

  6. unnamed (44).jpg

    unnamed (44).jpg

    • ahumadora
    • Media item
    • Comments: 0
    • Album: Reverse Flow smoker build need help/advice
  7. unnamed (31).jpg

    unnamed (31).jpg

    • ahumadora
    • Media item
    • Comments: 0
    • Album: Reverse Flow smoker build need help/advice
  8. unnamed (28).jpg

    unnamed (28).jpg

    • ahumadora
    • Media item
    • Comments: 0
    • Album: Reverse Flow smoker build need help/advice
  9. ahumadora

    First Build 20" Offset

    check out my 20" smokers I build.  $5 for each idea you steal     http://www.ahumadoras.com/productos/ahumadora-para-el-hogar/home-smoker-1200-x-500-mm/ No reason to fun the horizontal tube for the base, just weld the legs straight to the smoker. Make the firebox opening to cook chamber...
  10. ahumadora

    Planning out my first build

    too tall and flimsy. They will bend in a heartbeat.     Go for something more sturdy and lower profile. also with the pivot there it will only open halfway. 3/16" is fine for firebox.   My small smokers use 3/16" steel and all you need to do is toss in another lump of wood to compensate. If...
  11. ahumadora

    Planning out my first build

    Leave the firebox the same size.     What thickness is the metal?
  12. ahumadora

    Horizontal/vertical WH smoker build

    Pollard, ou are knocking that out pretty quick. Yep Argentina is all F%#$# up and always will be.    Only thing I can see is you may want to reinforce where the hinges are welded ontothe door seal of the horizontal cooker.   They may flex or work the weld on the flange. Post us food pics and...
  13. ahumadora

    Help with a 250 RF smoker with a warming box.

    Hi there. It comes down to cost/time you need to invest in it. If you live in a cold climate and plan to smoke outside it maybe worthwhile. For me insulating the warming cabinet on a smoker for ocasional use is not worth it.
  14. ahumadora

    Horizontal/vertical WH smoker build

    Looks like you have it all under control...  Nice work 
  15. ahumadora

    Need Help w/ figuring out RF Fuel Tank Smoker/Cooker build

    I worry more about ground clearance under the firebox  . That pretty much dictates the height of the firebox.  then it is a trade off of height from the RF plate to racks vs  FB to RF plate height. A little height difference is not going to matter
  16. How to cut doors on a smoker

    How to cut doors on a smoker

  17. ahumadora

    How to cut doors on a smoker

    Ok, so I decided to turn a perfectly good propane tank into a useless 500 gallon trailer smoker. ;) I will give you a step by step run down of how I cut doors out. Place the tank on the ground or at an easy working height. then select which side looks the best to cut , so you will not have a...
  18. IMG-20170731-WA0046.jpg

    IMG-20170731-WA0046.jpg

    • ahumadora
    • Media item
    • Comments: 0
    • Album: How to cut doors on a smoker
  19. IMG-20170731-WA0049.jpeg

    IMG-20170731-WA0049.jpeg

    • ahumadora
    • Media item
    • Comments: 0
    • Album: How to cut doors on a smoker
  20. IMG-20170731-WA0047.jpeg

    IMG-20170731-WA0047.jpeg

    • ahumadora
    • Media item
    • Comments: 0
    • Album: How to cut doors on a smoker
Top Bottom
Back
Clicky