Toggle sidebar

Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. dragons breath

    Ok, here we go.

    cheers to another great start!
  2. dragons breath

    500 Gal. Reverse Flow Build

    Sweet! nice looking rig.
  3. dragons breath

    Slow motion reverse flow 300 gal.

    Yeah ribrustler67. mounted dead center. If my calcs are right..... it should be close on both ends and the center. My first center fired had the RF plate lower on the left side. The left side had the coolest temps. This time the Rf plate is level and with the heat shield under center of the Rf...
  4. IMG_8122.JPG

    IMG_8122.JPG

    • dragons breath
    • Media item
    • Comments: 0
    • Album: Slow motion reverse flow 300 gal.
  5. dragons breath

    Slow motion reverse flow 300 gal.

    Got the RF plate welded in with dam and water test. Ready to stick it! It's better to have too much trailer. I found out the hard way. The smoke chamber over the trailer for measurements. I had to remove 34" off the back of the trailer and I will remove 38" from the front. Then it will...
  6. IMG_8115.JPG

    IMG_8115.JPG

    • dragons breath
    • Media item
    • Comments: 0
    • Album: Slow motion reverse flow 300 gal.
  7. IMG_8109.JPG

    IMG_8109.JPG

    • dragons breath
    • Media item
    • Comments: 0
    • Album: Slow motion reverse flow 300 gal.
  8. IMG_8104.JPG

    IMG_8104.JPG

    • dragons breath
    • Media item
    • Comments: 0
    • Album: Slow motion reverse flow 300 gal.
  9. dragons breath

    250 gallon RF build

    Good start.  Yeah all them propane tanks have a lip of some kind where they weld the ball ends to the rolled plate. Keep working away and you'll be done before you know it! Dave
  10. dragons breath

    Questions<---will lead to new RF trailer build

    Sounds like that trailer should work. What's the GVW on it? A little more trailer than you need is always good. I keep adding things to mine. I did a center fire but you probably want to go conventional with the fire box at one end. That will allow you to mount a warming box over the firebox. I...
  11. dragons breath

    my first 250 gal reverse flow

    You don't miss anything Dave. Thanks for the compliment and yeah if there are no accidents the company pops for a BBQ every month! Dave
  12. dragons breath

    Questions<---will lead to new RF trailer build

    Hello e-zlight. Welcome to the forum. My personal opinion is to go with the 250. That's what I have and in the last 2 years I've run out of cooking real estate at least a half dozen times. Mine uses a 40# bag of mesquite charcoal to run for 6 or so hours  at 225 to 250 degrees. And yes it will...
  13. dragons breath

    my first 250 gal reverse flow

    Afternoon,  I'm not sure what aps you might be talking about. I retired in June and was volunteering for a great smoke. Any excuse will get me smoking! Dave
  14. dragons breath

    my first 250 gal reverse flow

    This is the last of the season BBQ at work (yesterday). We got the meat prep area full. Baby backs, chicken, tri-tip, 2 kinds of sausage, corn and 3 kinds of peppers That's my partner from work. He's a brilliant cook. My little smoker ran out of room again! We had to wait for room for...
  15. IMG_7989.JPG

    IMG_7989.JPG

    • dragons breath
    • Media item
    • Comments: 0
    • Album: my first 250 gal reverse flow
  16. IMG_7987.JPG

    IMG_7987.JPG

    • dragons breath
    • Media item
    • Comments: 0
    • Album: my first 250 gal reverse flow
  17. dragons breath

    500 gal reverse flow build (my first smoker)

    Pretty cool. You went from one axle to two in nothing flat!. Still looks a little light on the front. Dave
  18. dragons breath

    250gal Reverse Flow Trailer Build

    Nice looking smoker you build there. I like the way you handled the doors. Dave
  19. dragons breath

    Slow motion reverse flow 300 gal.

    Rasimmo you're right about the differences in thermal expansion, but I drilled the pipes .016" over size so there would be room for a good fit. All that is needed is a 1/64" over sized drill bit.    I have made 3 different size hinges and found the bits very reasonable on eBay. That being said I...
  20. dragons breath

    my first 250 gal reverse flow

    Here's a better picture of the swing out stools. I saw them on Grills Gone Wild. These are some smoking little stools.
Great deal on LEM Grinders!
Top Bottom
Back
Clicky