Toggle sidebar

Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. dragons breath

    330 Gallon First Build Help

    That's what I would do, go with a 500. Around here where I live, a 500 has not come for a reasonable price, but one of these days. There are problems with too fat of a tank. Access to the inside. Of course this can be over come. Pull out cooking grates and doors on both sides of the cooker. I...
  2. dragons breath

    boykjo's reverse flow build 05/07/2015 update

    I too like your double doors, easy access!  And Looks like you're going to get her done this year. I can relate to that. It's looking good. Keep up the motivation. Dave
  3. dragons breath

    first time build 250 gallon propane tank

    Nice beefy looking smoker with tandem axles. Now for some que view.
  4. dragons breath

    Slow motion reverse flow 300 gal.

    Got a little done. I tend to think more than I do. The geometry of the door only required one counter weight. I finished the lower grill surface in the smoker. The cooking area on the grill is ready to try out. I committed to cooking 50 turkeys for thanksgiving. That gives me a...
  5. IMG_9019.JPG

    IMG_9019.JPG

    • dragons breath
    • Media item
    • Comments: 0
    • Album: Slow motion reverse flow 300 gal.
  6. IMG_9015.JPG

    IMG_9015.JPG

    • dragons breath
    • Media item
    • Comments: 0
    • Album: Slow motion reverse flow 300 gal.
  7. IMG_9011.JPG

    IMG_9011.JPG

    • dragons breath
    • Media item
    • Comments: 0
    • Album: Slow motion reverse flow 300 gal.
  8. dragons breath

    275 gallon RF Flame Smoker Completed

    Awesome build. Best flame job I've ever seen. And the HOG! first time every time! Most excellent!
  9. dragons breath

    500 gallon smoker build

    Awesome tank. I cut them off with a cut off wheel and plug welded them flush. The feet let me set the tank flat and level on the trailer with no effort. I did have a little warpage problem with the 300 gal. Didn't with the 250. I think that my door cut was closer to the tank piercings on the...
  10. dragons breath

    New rf offsett build

    Looks like you got a lot done for one day. At this rate you will have this puppy up and smoking in no time. Dave
  11. dragons breath

    Slow motion reverse flow 300 gal.

    Got a little done. Getting the plate for the trailer cause a slight delay. Only 4 or 5 months ha ha. But we're back at it now.
  12. IMG_8996.JPG

    IMG_8996.JPG

    • dragons breath
    • Media item
    • Comments: 0
    • Album: Slow motion reverse flow 300 gal.
  13. IMG_8995.JPG

    IMG_8995.JPG

    • dragons breath
    • Media item
    • Comments: 0
    • Album: Slow motion reverse flow 300 gal.
  14. dragons breath

    My latest creation....

    Wow I don't know how I missed this build. Great job. You put a French fry cutter on it so you must have a deep fryer somewhere? I like your ideas of putting anything and everything you want or might need. Which means this one isn't quite finished yet. I think this is the first "Argentine...
  15. dragons breath

    Dual RF Smokers on trailer....My first adventure

    Awesome! It came out GREAT!
  16. dragons breath

    Wow...I have spent sooooo many hours here trying to decide and finalize my design - need some input

    Sounds like you have done your homework. Can't wait to see where you go with it.
  17. dragons breath

    Ok, here we go.

    I like the self emptying feature.Well thought out and executed. Dave
  18. dragons breath

    Firebox door on side or top?

    Curves I like curves. They require more thought and work but curves give it a look. Dave
  19. dragons breath

    Firebox door on side or top?

    It's easier to have one side door for loading charcoal, wood, and cleaning out ashes. Other than that a top door would work.
  20. dragons breath

    325 Gallon Reverse Flow Build

    Hello Nightrod. Is that a gate valve? IMHO I wouldn't use a globe valve as it's too convoluted. I see you used an elbow. Sometimes I have to run a rod down mine to clean it out. If you seal welded the RF plate it can be used for water. I have put water in mine and it works. If it's removable...
Great deal on LEM Grinders!
Top Bottom
Back
Clicky