Toggle sidebar

Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. FrontWheels 004.JPG

    FrontWheels 004.JPG

    • geothermal
    • Media item
    • Comments: 0
    • Album: 20" Pipe RF Smoker
  2. FrontWheels 002.JPG

    FrontWheels 002.JPG

    • geothermal
    • Media item
    • Comments: 0
    • Album: 20" Pipe RF Smoker
  3. geothermal

    20" Pipe RF Smoker

    Good Idea Dave. I will be able to just lift it off the collar, but that would save having to do that. l won't be moving it around much so a good slathering of grease before I set it on there should last a while.
  4. geothermal

    20" Pipe RF Smoker

    Got a start on the front pivoting wheel hub yesterday after the rain ended. Next I'll drill holes for the 1 1/4" axle rod, and weld it to the bottom front of the CC. The bottom 4" pipe will "Pivot" inside the hub so I can pull it around with my lawn tractor.
  5. AXLE 001.JPG

    AXLE 001.JPG

    • geothermal
    • Media item
    • Comments: 0
    • Album: 20" Pipe RF Smoker
  6. geothermal

    20" Pipe RF Smoker

    Thanks again Len. The fit isn't too bad. Got it put together last night. Here are some pictures.
  7. smokestack 002.JPG

    smokestack 002.JPG

    • geothermal
    • Media item
    • Comments: 0
    • Album: 20" Pipe RF Smoker
  8. smokestack 001.JPG

    smokestack 001.JPG

    • geothermal
    • Media item
    • Comments: 0
    • Album: 20" Pipe RF Smoker
  9. geothermal

    20" Pipe RF Smoker

    Thanks Wolfman,   I think I'm going for the rusty old "Steam Punk" look. Not sure if I'm even going to paint it yet. Yes, the front end is going to be a challenge. I was hoping to work on that today, but the weather isn't cooperating. Good idea on the jack stands. I'll have to see how stable it...
  10. geothermal

    20" Pipe RF Smoker

    Got to the steel yard Monday and picked up some 4" x 1/4" pipe for the smoke stack and front wheel attachment. The 4" id pipe is 4 1/2" od. They had some 4 5/8 id x 3/16 pipe that I bought to use in place of the Socket Weld Coupling like Len suggested. A little pricy at $26/ft but I only needed...
  11. geothermal

    20" Pipe RF Smoker

    You mean like this Len? Of course I am, and it wouldn't be complete without a steering wheel that will open the CC Door. I call it the HOT SEAT!
  12. Seat 002.JPG

    Seat 002.JPG

    • geothermal
    • Media item
    • Comments: 0
    • Album: 20" Pipe RF Smoker
  13. geothermal

    20" Pipe RF Smoker

    Thanks again Len. I'll be off to the steel yard to see what I can find. Made some progress today on the back wheels. My vision is starting to take shape.
  14. Wheels 006.JPG

    Wheels 006.JPG

    • geothermal
    • Media item
    • Comments: 0
    • Album: 20" Pipe RF Smoker
  15. Wheels 007.JPG

    Wheels 007.JPG

    • geothermal
    • Media item
    • Comments: 0
    • Album: 20" Pipe RF Smoker
  16. Wheels 002.JPG

    Wheels 002.JPG

    • geothermal
    • Media item
    • Comments: 0
    • Album: 20" Pipe RF Smoker
  17. Wheels 005.JPG

    Wheels 005.JPG

    • geothermal
    • Media item
    • Comments: 0
    • Album: 20" Pipe RF Smoker
  18. geothermal

    20" Pipe RF Smoker

    Yes, it's going to be 4" pipe. Thanks for the tip. Never heard of that before. I'll have to try and find one. Wow! Just found one at Granger for $93. Ouch!
  19. geothermal

    20" Pipe RF Smoker

    Got the FB almost finished. Not sure how the latches will be under heat. After the first failed hing, these were a re-fab that work. Got the smoking rack done. Inside of FB Door. Next will be the 4" smoke stack. I want to find a 4" coupling to weld to the plenum so I can remove the...
  20. Firebox2 009.JPG

    Firebox2 009.JPG

    • geothermal
    • Media item
    • Comments: 0
    • Album: 20" Pipe RF Smoker
Great deal on LEM Grinders!
Top Bottom
Back
Clicky