Recent content by sly anthony
-
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
-
120 gal smoker build
Latest update , my miller welder idle control board died so project was on hold . got it fixed so i will be going at it today .- sly anthony
- Post #21
- Forum: Reverse Flow
-
120 gal smoker build
Are redirecting vanes a must ? and if so are there specific measurements for their length and width ?- sly anthony
- Post #20
- Forum: Reverse Flow
-
120 gal smoker build
- sly anthony
- Post #18
- Forum: Reverse Flow
-
120 gal smoker build
I decided to make the fire box 20h x 20L x24w. Using those figures the cc/fb cut out is now 76.8 sq in x 1.5 = 115.2 sq in as opposed to 74 sq in x 1.5 = 111 sq in from a smaller fire box as previously calculated by Len. My question is will my previous chord of 21.8 inches and my segment height...- sly anthony
- Post #16
- Forum: Reverse Flow
-
120 gal smoker build
Sounds like a plan Len You can visit anytime. Just to make sure i am doing this right i worked out the cut out for my 250 gal build take a look at these figures and tell me i am doing it right or not Tank volume 250 gal Diameter 30 in firebox at 100% is 156 x 1.5 = 234 Radius 15 in segment...- sly anthony
- Post #14
- Forum: Reverse Flow
-
120 gal smoker build
Eureka !!!!!!!! after reading Dave's posts on other threads and using the info from Len I figured out how the circle calculator works and is very simple too Thanks Len thanks Dave , I have even worked out the CC/FB cut out for my 250 Gal build, i will post the figures for critiques just to make...- sly anthony
- Post #12
- Forum: Reverse Flow
-
120 gal smoker build
- sly anthony
- Album
- Comments: 0
-
120 gal smoker build
Here are some pics of the main components of the build. Can someone please tell me what size the CC doors should be on a 120 gal smoker ? also how many racks and spacing and height above the Baffle plate ? Thanks in advance. I plan to covert these old aluminum traffic light control cabinets...- sly anthony
- Post #10
- Forum: Reverse Flow
-
20140812_134757.jpg
- sly anthony
- Media item
- Comments: 0
- Album: 120 gal smoker build
-
20140812_184852.jpg
- sly anthony
- Media item
- Comments: 0
- Album: 120 gal smoker build
-
20140812_184800.jpg
- sly anthony
- Media item
- Comments: 0
- Album: 120 gal smoker build
-
20140812_175408.jpg
- sly anthony
- Media item
- Comments: 0
- Album: 120 gal smoker build
-
120 gal smoker build
Much appreciated Len. I am now in a much better position to start making confident cuts in the tank. I love this site, you guys are genuinely friendly and always will to jump in and help. It amazes me how much knowledge and experience is contained here.- sly anthony
- Post #9
- Forum: Reverse Flow
-
120 gal smoker build
Happy to know that it will work.. So this afternoon i decided to play Einstein and play with the circle calculator and it took me 30 mins and one big headache to figure out that i had no idea what the heck i was doing or how the calculator works. Somebody please save me from myself. I will post...- sly anthony
- Post #7
- Forum: Reverse Flow
-
120 gal smoker build
My friend at the gas company said my tanks have been sitting in their scrap yard for almost 5 years so i stuck my nose in the propane tank fill valve today and inhaled real deeply and there is no propane smell, next im gonna do a flame test with a very long stick and a flaming rag over the...- sly anthony
- Post #4
- Forum: Reverse Flow
