Toggle sidebar

Recent content by mmiller

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. mmiller

    Anyone here own a Green Mountain pellet grill?

    Let me know how it turns out.
  2. mmiller

    Anyone here own a Green Mountain pellet grill?

    I own a Davy Crockett and this is what I did to even out the temperature across the grate. I raised up the right side of the grease pans by putting a piece of flat Aluminum Bar inside the grease drain and let the grease trays rest on the flat Aluminum Bar. The Aluminum Bar is about 1 1/2" wide...
  3. mmiller

    No flare ups with Flame Disk Bowl Masterbuilt XL:

    I found out how to use the Flame Disk Bowl without your wood catching fire. First remove the Flame Disk Bowl and allow the Smoker to reach your desired temperature. When the desired temperature is reached, open the door and insert the Flame Disk Bowl with the wood in it. Close the door and allow...
  4. 100_0158.JPG

    100_0158.JPG

    • mmiller
    • Media item
    • Comments: 0
    • Album: DIY Side Table for Kettle:
  5. DIY Side Table for Kettle:

    DIY Side Table for Kettle:

    • mmiller
    • Album
    • Comments: 0
  6. 100_0156.JPG

    100_0156.JPG

    • mmiller
    • Media item
    • Comments: 0
    • Album: DIY Side Table for Kettle:
  7. mmiller

    DIY Side Table for Kettle:

    Here is photo of a side table that I made for my Weber Kettle. I used the top from my Weber 1800 Side Kick Table and mounted it onto an RV table base and used an RV pedestal Leg. I used the RV table  based called ""Porta-Leggs".  If you do not want to use the Porta-Leggs, you can use the RV cone...
  8. mmiller

    Hi from Summerville, SC

    Hello Vince: Glad to have you aboard. I am up the road from you in Greenwood, SC.
  9. mmiller

    Hi from Summerville, SC

    Hello Vince: Glad to have you aboard. I am up the road from you in Greenwood, SC.
  10. mmiller

    Masterbuilt discontinued Cold Smoker Kit?

    I contacted Masterbuilt and asked when would the Cold Smoker Kit be available, since it has been out of stock for the past couple of months.  The rep said they didn't know when it would be back in stock.  I asked was it being  discontinued? And was told "something like that".  The rep said that...
  11. mmiller

    Masterbuilt Cold Smoker & XL Propane Smoker

    The Cold Smoker is hard to find. Evidently Masterbuilt only orders a few at a time (from China). One day they are in stock, the next day they are out of stock. The same way with BassPro. I ordered mine from Wal-mart (Site to Store) and it took almost three weeks to get here. A few hours after I...
  12. Masterbuilt Cold Smoker & XL Propane Smoker

    Masterbuilt Cold Smoker & XL Propane Smoker

    • mmiller
    • Album
    • Comments: 0
  13. mmiller

    Masterbuilt Cold Smoker & XL Propane Smoker

    I attached a Masterbuilt Cold Smoker onto my XL Propane Smoker. I had to make a couple of mods to both. I cut a 3" hole in the XL so that the Cold Smoker would fix. I put a baffle (thin sheet metal plate with a hole in it) on the Chip Tube Screen to reduce the amount of heat applied to the...
  14. 100_0153.JPG

    100_0153.JPG

    • mmiller
    • Media item
    • Comments: 0
    • Album: Masterbuilt Cold Smoker & XL Propane Smoker
  15. A-Maze-N-Tube for Masterbuilt XL Propane Smoker

    A-Maze-N-Tube for Masterbuilt XL Propane Smoker

    • mmiller
    • Album
    • Comments: 0
See more
Top Bottom
Back
Clicky