Recent content by miersc77

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. miersc77

    New Brick Smoker build starts tomorrow

    Congratulations on the completion! It's awesome!!
  2. miersc77

    Needle Valve Mod

    It all makes sense now, I just thought it was my phone. I can see the benefits of the extension hose but I like where my valve is and that it's fixed (does not move when reaching for it) but it's all about preference. Thanks again, it is a handy fix! Mike
  3. miersc77

    Needle Valve Mod

    Two parts? The same valve came up on my phone when I clicked on the links. Maybe we're talking about the same thing. This is the best mod yet! Mike
  4. miersc77

    Needle Valve Mod

    @Xray one thing to think about is the placement of the needle valve, if by the regulator and tank it means moving away from the smoker to adjust the valve, if placed by the burner you can watch the flame while you adjust. Just something to thing about. How was the ribs? You could have shared...
  5. miersc77

    Needle Valve Mod

    Hey @Xray sorry it took me awhile but it looks like you got er figured out, work alright? Congrats @stevo8! Remember to watch for blow out, had it happen a few times. If your using a thermometer like the maverick et-733 you'll know pretty quick. So what's for dinner? Mike
  6. miersc77

    Needle Valve Mod

    I would recommend that you take your LPG hose with you so they have both thread types. Nothing sucks worse than being all excited to hook it back up then realizing someone goofed! Good luck! Mike
  7. miersc77

    Needle Valve Mod

    Sorry it took me a lil bit to get back with you, I just went to my local gas store and told them what I was doing and they hooked me up. If you would like I can take it apart this weekend, take some pics and narrow it down to what you need. Hopefully you'll be up smokin by Sunday! Mike
  8. miersc77

    Needle Valve Mod

    I too built a shelve under the burner to hold the AMNPS. I have to do some tweaking on mine as there doesn't seem to be the right amount of draft pulling into the upper chamber. I believe if I was to put a stack on it (like I want to anyway) it would work how I want it to.
  9. miersc77

    Needle Valve Mod

    Ha.. you read my mind, a trip to the store is in my near near future!
  10. miersc77

    Needle Valve Mod

    I believe it's a Bayou classic, found it on amazon for about $15. I also received my AMNPS at the same time, it was a good day yesterday!!
  11. IMG_20150423_134632121_zpse1mr8zcm.jpg~original

    IMG_20150423_134632121_zpse1mr8zcm.jpg~original

    • miersc77
    • Media item
    • Comments: 0
    • Album: Needle Valve Mod
  12. Needle Valve Mod

    Needle Valve Mod

    • miersc77
    • Album
    • Comments: 0
  13. miersc77

    Needle Valve Mod

    I have a Masterbuilt 2 door dual fuel smoker, that I've been struggling with. Ever since the weather got warmer I can not keep my temps low. I would watch the temp climb over 300*, usually stopping around 310*.After searching the forum and reading idea, after idea, I went ahead and ordered a...
  14. IMG_20150424_085350770_zpsptzqmnau.jpg~original

    IMG_20150424_085350770_zpsptzqmnau.jpg~original

    • miersc77
    • Media item
    • Comments: 0
    • Album: Needle Valve Mod
  15. IMG_20150423_163138322_zpstukpcw0h.jpg~original

    IMG_20150423_163138322_zpstukpcw0h.jpg~original

    • miersc77
    • Media item
    • Comments: 0
    • Album: Needle Valve Mod
See more
Top Bottom
Back
Clicky