Recent content by flame boss

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. flame boss

    Flame Boss Pit Probe position

    Al, Thank you for the encouragement. Best, Michael
  2. flame boss

    Flame Boss Pit Probe position

    Hi John, Thank you for choosing Flame Boss. We suggest clipping the probe to the food grate over the plate setter so that it is measuring the same general area as your food. The space close to the edge, over the gap between the plate setter and the side of the grill, is typically hotter. As you...
  3. flame boss

    BBQ Guru not getting up to temp

    The new Universal blower assembly will include a manifold (dog bowl) similar to the one that Pitmaster IQ uses. You will bolt this manifold to your WSM before starting the fire and the blower will snap into the manifold. It is hard to give you a real world WiFi range. I am sure that there are...
  4. flame boss

    BBQ Guru not getting up to temp

    Hi Randy, I do not like to make sales posts here or on other forums, but since you ask on a thread that includes my post... This is a good time to announce that all parts are finally made for Flame Boss 200 & 100 redesigned for WSM (our Universal version). We expect to finish assembly and start...
  5. flame boss

    BBQ Guru not getting up to temp

    You might want to test both the BBQ Guru and Maverick probes in boiling water to see which is accurate. Unless you live at high elevation, boiling water should be 212˚F. It might be best to try to avoid dunking the probes to where the join with the cable just in case the seal isn't waterproof...
  6. flame boss

    Any new WIFI enabled temperature monitors I don't know about?

    Not really, I am not sure about all of the others, but with Flame Boss 200, Stoker and CyberQ you can monitor and control your cook from anywhere in the world as long as you have an an Internet connection. It may not be satisfying to some, but I like that I can check on my dinner while I am at...
  7. flame boss

    Any new WIFI enabled temperature monitors I don't know about?

    Hi Balismoke, We at Flame Boss are introducing a new WiFi enabled smoker controller. It will start shipping next week. You will find it much easier to use than CyberQ and I hope that you will like the web interface. Since you already have a CyberQ, you could buy just the controller and...
  8. flame boss

    BBQ Guru or ATC Controller

    You could not power an oven heating element directly with a BBQ Guru or ATC Controller or for that matter with a Flame Boss smoker controller. All of these controllers incorporate 12 volt fans that draw very little power. You could not just substitute the fan for a heating element. It seems...
See more
Top Bottom
Back
Clicky