Toggle sidebar

Recent content by dannyj

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. dannyj

    Has anyone thoroughly satisfied with their Fridge conversion build?

    Finished my conversion in May.  Works like a champ, holds temps great.  Smokin' ribs and Dutch's wicked beans as we speak...
  2. 100_2170.jpg

    100_2170.jpg

    • dannyj
    • Media item
    • Comments: 0
    • Album: Default
  3. 100_2170.jpg

    100_2170.jpg

    • dannyj
    • Media item
    • Comments: 0
    • Album: Default
  4. 100_2170.jpg

    100_2170.jpg

    • dannyj
    • Media item
    • Comments: 0
    • Album: Default
  5. 100_2170.jpg

    100_2170.jpg

    • dannyj
    • Media item
    • Comments: 0
    • Album: Default
  6. 100_1889.jpg

    100_1889.jpg

    • dannyj
    • Media item
    • Comments: 0
    • Album: Default
  7. 100_1889.jpg

    100_1889.jpg

    • dannyj
    • Media item
    • Comments: 0
    • Album: Default
  8. dannyj

    fridge/smoker conversion

    here are couple pics of the firebox.  Bottom of charcoal basket is about 5 inches above bottom of box.  I have 4 one inch holes on each side for air with a slide for adjustment. I normally smoke around 230-240. I did heat to 300 degree inside the fridge just to see if I could reach that temp. It...
  9. 100_1977.jpg

    100_1977.jpg

    • dannyj
    • Media item
    • Comments: 0
    • Album: Default
  10. 100_1981.jpg

    100_1981.jpg

    • dannyj
    • Media item
    • Comments: 0
    • Album: Default
  11. dannyj

    Custom Smoker Builds, Pics of all of them.

    Matt, great job on the smoker builds..here is my completed fridge/smoker build.
  12. 100_1889.jpg

    100_1889.jpg

    • dannyj
    • Media item
    • Comments: 0
    • Album: Default
  13. 100_1889.jpg

    100_1889.jpg

    • dannyj
    • Media item
    • Comments: 0
    • Album: Default
  14. dannyj

    fridge/smoker conversion

    The inside is the original metal.  The trim around the door and just inside the door was plastic so I replaced it with aluminum strips which were were cut from stockcar body panels. I had to cover a few holes on the inside so I used the metal from the sides of an old dryer. Used 500 degree RTV...
  15. dannyj

    fridge/smoker conversion

    here are 2 pics of the inside. I have a short video on You Tube, just search "how to build a refridgerator smoker"
See more
Top Bottom
Back
Clicky