• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Recent content by big deck bb-jr

  1. big deck bb-jr

    Rust in UDS?

    I think mine has come from ashes that may have slipped in the bottom, and because I used to use a water pan. Hopefully with a few more cooks it will go away.
  2. big deck bb-jr

    Rust in UDS?

    How do you guys keep rust out of your UDS? I used to put foil in to bottom of mine to collect ash. I then saw that people were using pizza pans, but I couldn't find one large enough, so I used a water heater pan and cut to size. It was sprayed with high heat paint. After about a year now...
  3. big deck bb-jr

    UDS lids

    Thanks guys. I'm going to have some guys at my company take some scrap and weld it to the inside of my drum to make a lip for the new lid to "catch" on to. I then want to add a second rack a few inches below the lip. That should give me about 6 inches between racks, and >2 inches between the...
  4. big deck bb-jr

    Chicken legs on a UDS

    Did you rotate the grates?
  5. big deck bb-jr

    UDS lids

    looks like my two options are to cut the rim off of the drum or to weld something to the inside of the drum that extends above the lip.
  6. big deck bb-jr

    UDS lids

    Just wondering what others have done in regards to a lid for the UDS. I built mine over a year ago and have been wanting to change the drum lid to a dome style lid instead. I bought a grill today that had a 22.5" diameter, but the lid is a little too small for the UDS. Thoughts or...
  7. big deck bb-jr

    Need recommendations for thawing ribeyes quickly!

    I saw a friend do this and it worked well. He had one of those baskets to out dishes in after hand washing them (you coul find something to substitute) an turned it upside down in the kitchen sink. Boil water and pour into the sink (with stopper in, of course). While your water is boiling...
  8. image.jpg

    image.jpg

  9. image.jpg

    image.jpg

  10. big deck bb-jr

    Does injecting reduce cook time?

    Well thanks again for everyone's input. It turned out great, finished after about 12-13 hours. Super tender, like warm butter. The butt looks a little jacked, I've got the fat cap up (I left it On during smoke and removed before pulling) and the bark "slid".
  11. Does injecting reduce cook time?

    Does injecting reduce cook time?

  12. image.jpg

    image.jpg

  13. big deck bb-jr

    How clean out a UDS

    I didn't think about it when I built mine. I ended up with a huge basket and couldn't find an off-the-shelf pizza pan to fit. Ended up cutting a water heater pan to size an bolting to the basket. I still have foil below that though, to catch everything that slips through. But it's bc I don't...
Top Bottom
  AdBlock Detected

We noticed that you're using an ad-blocker, which could block some critical website features. For the best possible site experience please take a moment to disable your AdBlocker.