Fully insulated "cooking vessel"

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

loosegravel

Newbie
Original poster
Feb 25, 2020
7
12
I've been working on a project to go with my smoke generator. I want to be able to walk away from the smoker and not worry about cooking temperature. So I have put this together. It's actually a Char-griller unit inside of a 55 gallon drum. The insulation is in between the halves. The heating element along with the manual thermostat came out of an older oven. The temperature can be dialed in. It also heats up and maintains the heat with no problem even when the ambient temperature is in the teens.
 

Attachments

  • IMG_1718.JPG
    IMG_1718.JPG
    150.5 KB · Views: 21
  • IMG_1719.JPG
    IMG_1719.JPG
    180.8 KB · Views: 21
  • IMG_1724.JPG
    IMG_1724.JPG
    159.1 KB · Views: 21
  • IMG_1725.JPG
    IMG_1725.JPG
    142 KB · Views: 22
  • IMG_1726.JPG
    IMG_1726.JPG
    144.3 KB · Views: 22
  • IMG_1727.JPG
    IMG_1727.JPG
    138.8 KB · Views: 21
  • IMG_1730.JPG
    IMG_1730.JPG
    91.8 KB · Views: 19
  • IMG_1736.JPG
    IMG_1736.JPG
    166.8 KB · Views: 19
  • IMG_1743.JPG
    IMG_1743.JPG
    179.2 KB · Views: 19
  • IMG_1744.JPG
    IMG_1744.JPG
    150.9 KB · Views: 19
  • IMG_1731.JPG
    IMG_1731.JPG
    179.1 KB · Views: 20
  • IMG_1741.JPG
    IMG_1741.JPG
    151.2 KB · Views: 19
  • IMG_1738.JPG
    IMG_1738.JPG
    104.7 KB · Views: 19
  • IMG_1739.JPG
    IMG_1739.JPG
    136.4 KB · Views: 18
  • IMG_1740.JPG
    IMG_1740.JPG
    148.8 KB · Views: 19
  • IMG_1742.JPG
    IMG_1742.JPG
    184.1 KB · Views: 19
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky