- May 12, 2015
- 4
- 10
Hi everyone,
As my first build I decided to take advantage of having a fireproof file cabinet.
The Cabinet was donated by an acquaintance who wanted it gone from his place.
I had a few concerns about when it was. Built and if asbestos was present. Long story short - it was good to go.
Each drawer was compartmentalized and had a plaster / wire mesh division in between, after cutting those, I made the decision and cut the bottom of the top 3 drawers.
The bottom drawer is being used as the fire box.
I found out is very efficient ( in my opinion ) ) brought the temperature up to 220 and every hour I would add a block of oak 4" x 4" and would hold temp for about 50in +-.
Here is another pic
I would greatly appreciate any advice-
I still need to add permanent temp Gages
I actually used as a grill today. :D
Thanks for looking at my project
DH
As my first build I decided to take advantage of having a fireproof file cabinet.
The Cabinet was donated by an acquaintance who wanted it gone from his place.
I had a few concerns about when it was. Built and if asbestos was present. Long story short - it was good to go.
Each drawer was compartmentalized and had a plaster / wire mesh division in between, after cutting those, I made the decision and cut the bottom of the top 3 drawers.
The bottom drawer is being used as the fire box.
I found out is very efficient ( in my opinion ) ) brought the temperature up to 220 and every hour I would add a block of oak 4" x 4" and would hold temp for about 50in +-.
Here is another pic
I would greatly appreciate any advice-
I still need to add permanent temp Gages
I actually used as a grill today. :D
Thanks for looking at my project
DH