Make ur own

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

hounds51

Smoking Fanatic
Original poster
Feb 5, 2009
429
13
Lebanon Bolongatown P.A.
Here is how I currently make my own bacon Hangers. Ironically I use my old metal clothes hangers, after I clean and sanitize them. These work well for a once and done project. I use then throw away. The following pictures are self explantory. Any questions feel free to ask. Dennis

Thread the sides through
Detail of hook up

Close up of hookup

Hangin with hanger

If you look closely, you will see that I bent the hanger closer to the bellies so that I could spread them out. Also note the temp probe in the right side.
 
Yea I thought about doing them that way, but this involves less work. I have smoked with this hanger about 4 times, and always came out good. Takes a couple of mins per each hanger.
 
Great idea thanks for posting
icon14.gif
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky