or Connect
SmokingMeatForums.com › Forums › Announcements › Roll Call › CVSI Doug
New Posts  All Forums:Forum Nav:


post #1 of 19
Thread Starter 
Hello smokers. My name's Doug, and I have a few questions as a brand new meat smoker. I just purchased an electric smoker (Masterbuilt), and am hoping I didn't make a poor choice. Does anyone here have experience with this particular smoker?
post #2 of 19
Welcome to SMF. I dont have that smoker but lots of others do. Sign up for the 5 day ecourse. Lots of great information there.
post #3 of 19
welcome and while i have no experience with that unit, others here do so sit back and enjoy.
post #4 of 19
Welcome to the SMF Doug! Alas, I too offer no sage advice on the MES but, as already stated, there are many here that do!
post #5 of 19
Hi Doug,

Welcome to the forum. I just joined about a week ago. I have been smoking for about 5 years with a Little Chief. When it died recently, we got a new MES smoker. Luckily before I did my first smoke with it, I found this forum. Go to the Electric Smoker section and read up on the MES. Lots of good stuff there.

post #6 of 19
Good to have you along.
post #7 of 19
First off welcome Doug to SMF. You'll like it here cause there are abunch of good folks here that would just love to help you out with just about anything to do with smoking. We really like to have newbies here because they can bring in a new propective to how things are done. There's nothing like a new set of eyes to give and new way to make things that little differant to make things alittle better. So I hope you know about the Qview here.
Here's a link to photobucket it's free and easy to download pictures. Then if your really new to smoking Look up the E-course.
It's also free and it will give you the basics of smoking. So after all of that you just need to go grab something to smoke and if you have any question just post them here and we will answer it quickly so you don't have any mishaps with your smoke.
Welcome To Your New Addiction
post #8 of 19
Welcome to the SMF. Like tfries said... here's the link

post #9 of 19
Welcome to the SMF Doug,We are glad to have you onboard
post #10 of 19

Welcome, Glad to have you with us. This is the place to learn, lots of good info and helpful friendly Members.

For Those of you New to Smoking, be sure to check out Jeff's 5 Day Smoking Basics eCourse.
Click Here it's "FREE"... 5 Day eCourse

Everyone here enjoys seeing the Qview so be sure to post plenty of pics...

Large ones that us old people with bad eyes can see.

When you uploading to Photobucket I always use the Large IMG setting, 640 x 480 it is a nice size...

How to post Qview to Forum:

For Step By Step Instructions On Posting Qview Check Out This Tutorial

post #11 of 19
Welcome to the SMF. You will find all the smoking information you need right here. Someone will be along shortly to help you out with your new smoker.
post #12 of 19
Welcome to SMF. Glad you joined us.
post #13 of 19
Welcome aboard, Doug.
post #14 of 19
Welcome to the SMF Doug. I believe you made a good choice.
post #15 of 19
Welcome to the SMF. Enjoy your stay!
post #16 of 19
Thread Starter 
Well thanks for the warm welcome guys, and for the advice. I plan to get started soon. It's runing around the zero mark here in Minesota, so I might find an excuse to procrastinate until it gets a little warmer! I actually was a meat cutter for several years, worked in a locker plant, but it's been so long ago I don't remember a lot of the things I should.
Once again, thanks so much for the warm welcome. I'll let you know how it goes............

Merry Christmas to all
post #17 of 19
Welcome to the SMF.
post #18 of 19

Look for posts by ronp. I noticed he's using an MES. Here is a thread

post #19 of 19
Welcome, Doug. Great folks here that have been there and done that. Incredible source of information!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Roll Call
SmokingMeatForums.com › Forums › Announcements › Roll Call › CVSI Doug