or Connect
SmokingMeatForums.com › Forums › Announcements › Roll Call › To Much Heat
New Posts  All Forums:Forum Nav:

To Much Heat

post #1 of 7
Thread Starter 
I Have A Vertical Brinkman With Waterpan. I Took A Furnace Planium And Added 2 Inches Of Insulation To The Smoker Then Put The Planium Around It. I Did Not Do The Door. I Already Had The Holes Drilled In The Charcol Pan And Thought That I Was On Top Of The World . I Put The Charcol In The Pan And Waited For The Temp To Come Up Boy Did It Come Up. When I Pulled The Pan It Was Reading 350 Degrees. I Covered The Holes That I Drilled In The Pan . Going To Try It On Sunday I Hope That By Cuting The Air Down It Will Cool The Temp Down.
post #2 of 7

Welcome, Glad to have you with us. This is the place to learn, lots of good info and helpful friendly Members.

For Those of you New to Smoking, be sure to check out Jeff's 5 Day Smoking Basics eCourse.
Click Here it's "FREE"... 5 Day eCourse

Everyone here enjoys seeing the Qview so be sure to post plenty of pics...

Large ones that us old people with bad eyes can see.

When you uploading to Photobucket I always use the Large IMG setting, 640 x 480 it is a nice size...

How to post Qview to Forum:

For Step By Step Instructions On Posting Qview Check Out This Tutorial

post #3 of 7
Welcome to SMF. Good luck on your first burn with the new mods
post #4 of 7
Welcome to SMF. Glad you joined us.
post #5 of 7
First off welcome to SMF. You'll like it here cause there are abunch of good folks here that would just love to help you out with just about anything to do with smoking. We really like to have newbies here because they can bring in a new propective to how things are done. There's nothing like a new set of eyes to give and new way to make things that little differant to make things alittle better. So I hope you know about the Qview here.
Here's a link to photobucket it's free and easy to download pictures. Then if your really new to smoking Look up the E-course.
It's also free and it will give you the basics of smoking. So after all of that you just need to go grab something to smoke and if you have any question just post them here and we will answer it quickly so you don't have any mishaps with your smoke.
Welcome To Your New Addiction
post #6 of 7
Hello Outlaw, and welcome to the SMF! Glad you joined us. Good luck with your new mods, just be careful of cutting the air too much. Without enough air flow, any smoker will produce creosote - nasty stuff.
post #7 of 7
Welcome to the party!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Roll Call
SmokingMeatForums.com › Forums › Announcements › Roll Call › To Much Heat