or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Charcoal Smokers › ANOTHER cold smoking mod for the ecb and/or clones
New Posts  All Forums:Forum Nav:

ANOTHER cold smoking mod for the ecb and/or clones

post #1 of 8
Thread Starter 
found this on another site, Post 2378

http://forums.egullet.org/index.php?...=79195&st=2370
post #2 of 8
Looks pretty easy to do.
post #3 of 8
Pretty Slick Idea WD, Idea already tucked in a file
post #4 of 8
what a neat idea!
post #5 of 8
Thread Starter 
you pic did't come thru...........
post #6 of 8
I thought galvanized metal was a bad idea to use for cooking?
post #7 of 8
That's what I thought immediately when I read through this.
post #8 of 8
Thread Starter 
there are several threads here on galvanized metal and its uses.

it takes temps of close to 700 degrees for the galvanization to start to melt/smolder.

using galvanized at anytime for meat to touch is a no no

since this is being used as coldsmoking, where final temps are below 90's, and the galavanization is no where NEAR the food, no problems
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Charcoal Smokers
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Charcoal Smokers › ANOTHER cold smoking mod for the ecb and/or clones