Fatty Cannon

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

dirtsailor2003

Epic Pitmaster
Original poster
OTBS Member
Oct 4, 2012
21,947
4,224
Bend Oregon
Fatty Cannon, piston, press, whatever you want to call it. Got mine out to use so thought I'd post it here. All PVC. 2" for the barrel (10" long), 3/4" for the ram rod (14"). 2 slip fit ends caps, (2) 3/4" reducers, (1) 1 1/4", the other 1 1/2". No glue needed but you could if you wanted. Fill up the tube with whatever you want. Compress with plunger, leave about 1 1/2" of space in barrel. Put saran wrap on ends and place in freezer for a while to firm up. If you go to long run hot water over outside of barrel. Using ram rod push out filling.



1 1/2" cap for the hand side of the ram rod


1 14" for the jag side of the ram rod


Assembled


1 1/4" jag end fits perfectly.


Hand end does not!


Filled up. I have 4 barrels total


Push the meat out. If I was doing a fatty, I'd push it out right onto the sausage.


 
  • Like
Reactions: crazymoon
Is your middle name Ingenious?

That is a cool gadget.

I imagine this only works for all-meat fatties (not rolled with cheese, vegetables, other meats).
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Clicky