post #1 of 1
Thread Starter 

Hey All ,

 

After lurking for a bit I went with the forum recommended Masterbuilt 30" Propane to replace a 10 year old GOSM.

 

I assembled the unit and wanting to center the burner but not sure where about the venturi placement on the valve orifice as it's called in the manual. It "seems" if the burner is centered the venturi is just on the orifice. If I push it on all the way like the manual the burner is probably 1 inch out of center. 

 

Pic attached please give me some feedback on what I should do since I don't want to be wasting propane etc if I have it incorrect. 

 

Not sure if its easily seen but the orifice is only to the first hole on the venturi.

 

Most appreciated. :yahoo: