- Aug 26, 2015
- 3
- 10
Hey guys,
Long time lurker, first time poster.
So...
I just got an old fridge and decided to try and build a smoker from it.
As you can see, it was plastic on the inside, and it has a bunch of fiberglass insulation.
So I removed everything, but here is where I may or may not have messed up.
After removing the insulation, I decided to line the fridge with plywood.
Now, I have no idea why I did that. Maybe because I thought it looked better, maybe because I did not like all the rust on the sides, but it's done now.
Here is what I did with the rest. The bottom is just old disposable cookie trays.
I just bought the racks and will be finishing this thing shortly.
Ok, now that you've seen this very obvious rookie-build, I have a few questions.
1) Was it a bad idea to line the fridge with plywood? I see a lot of homemade wood smokers and thought it would be ok.
2) I was essentially going to use the same kind of set up as my brikmann charcoal smoker. Charcoal and wood chips in a stainless steel bowl at the bottom, bowl of water or ice above it, then the meats/fish/cheeses or whatever, on the racks above the water bowl.
3) Again with the plywood - Am I safe to smoke things like ribs or pork shoulders in there? I'm guessing it'll get up to 200 degrees, maybe 225. Is this ok? Or did I just build a dangerous fire pit?
4) If you suggest I remove the wood, should I line the walls with anything?
Ok, thanks for any and all help guys.
Im used to working with my beat up old 'Big Chief' and my charcoal Brikmann. I figured those were such simple designs that I could build my own. I'm just worried about the wood.
Here is some sockeye and a few cheesesI did last winter in those 2 previously mentioned smokers:
Thanks for looking and helping out.
Long time lurker, first time poster.
So...
I just got an old fridge and decided to try and build a smoker from it.
As you can see, it was plastic on the inside, and it has a bunch of fiberglass insulation.
So I removed everything, but here is where I may or may not have messed up.
After removing the insulation, I decided to line the fridge with plywood.
Now, I have no idea why I did that. Maybe because I thought it looked better, maybe because I did not like all the rust on the sides, but it's done now.
Here is what I did with the rest. The bottom is just old disposable cookie trays.
I just bought the racks and will be finishing this thing shortly.
Ok, now that you've seen this very obvious rookie-build, I have a few questions.
1) Was it a bad idea to line the fridge with plywood? I see a lot of homemade wood smokers and thought it would be ok.
2) I was essentially going to use the same kind of set up as my brikmann charcoal smoker. Charcoal and wood chips in a stainless steel bowl at the bottom, bowl of water or ice above it, then the meats/fish/cheeses or whatever, on the racks above the water bowl.
3) Again with the plywood - Am I safe to smoke things like ribs or pork shoulders in there? I'm guessing it'll get up to 200 degrees, maybe 225. Is this ok? Or did I just build a dangerous fire pit?
4) If you suggest I remove the wood, should I line the walls with anything?
Ok, thanks for any and all help guys.
Im used to working with my beat up old 'Big Chief' and my charcoal Brikmann. I figured those were such simple designs that I could build my own. I'm just worried about the wood.
Here is some sockeye and a few cheesesI did last winter in those 2 previously mentioned smokers:
Thanks for looking and helping out.