or Connect
New Posts  All Forums:Forum Nav:

Mailbox Mod

post #1 of 18
Thread Starter 

I'm really wanting to get something set up so I can use my AMNPS with the UDS all the time.  I have a large rural mailbox at my disposal but to me that seems to be way to large and funny looking.  I don't really have the ability to make anything from scratch so I'm searching for ideas.  So far I have come up with a couple that I wanted to get some opinions on.

 

My first thought was an old metal lunch box.  Seems like it would be the perfect size but I can't seem to figure out how to get around the lid being on top.  Wouldn't the "exhaust" or the smoke pipe need to come out the top for the best flow or could it vent out the back?

 

 

 

 

Option 2 is a vertical mailbox such as this..

 

 

This I would lay on it back and vent the smoke out the top with an elbo into the UDS.  Of course if anyone else has any other clever Ideas I'm all ears.  I have a 40lb bag of pellets I'm itching to use so I am wanting to get this done as soon as I can.

 

Thanks!

post #2 of 18

How bout a ammo can.    I have seen them used.

post #3 of 18

bought my all steel mailbox and all the fittings from home depot. Mailbox was $25, the fittings about $5.00. Dryer vent hose I already had. I screw the fitting into the valve on the UDS and away we go. The UDS uses a larger fitting than the mini so I have two different reducers to make it work. The valves on the UDS don't get as hot as the mini so I haven't been worried about the plastic melting. I only use this set up on the mini to cold smoke. Suppose I could rig it with brass or black pipe if I wanted to.

 

 

 

 

 

 

post #4 of 18
Thread Starter 

Farmer, the ammo can would work great also but they are more expensive then the mail boxes or the lunch boxes.  Dirtsailor I see that your vent comes out the back of the mail box.  so obviously my thought that it MUST come out the top is not correct.  The mail box I have laying around is exactly like that I was just hoping to get something smaller and permanently attach it to the UDS.  

post #5 of 18

I'd check on ebay what that lunchbox might be worth, before I'd start cutting into it. Some of them can go for a lot of $$.

post #6 of 18

I thought everyone had ammo cans laying around.    LOL  Sorry.

post #7 of 18

 

Yep right out the back. Look at the smoker in this thread by Pop's and see his mounted permanently. Picture is part way down.

 

http://www.smokingmeatforums.com/t/161782/the-picnic

 

I drillled a 3" hole in mine since I have large holesaws. You could cu a square or whatever with a jigsaw and a metal blade.

post #8 of 18
Thread Starter 
Quote:
Originally Posted by c farmer View Post
 

I thought everyone had ammo cans laying around.    LOL  Sorry.

LOL well alot of people might but not me..  :th_crybaby2:

post #9 of 18
Thread Starter 
Quote:
Originally Posted by mneeley490 View Post
 

I'd check on ebay what that lunchbox might be worth, before I'd start cutting into it. Some of them can go for a lot of $$.

I don't have a dukes of hazard lunch box.. if I did i wouldn't use it LOL.  I only used that picture for a laugh..  There is a plain old silver lunch box on amazon for 9.99.  :biggrin: 

post #10 of 18
Thread Starter 

Okay I see that I can easily make the big mailbox work with no issues and I might just go ahead and rig that up so I can start using it right away and maybe keep an eye out for something smaller.  

post #11 of 18
Keep in mind that something smaller may not provide enough air in the chamber to keep the smoke going.
post #12 of 18
Thread Starter 

That is one of my worries with the smaller box.. I will just have to see what happens.  All else fails i have the big ol mailbox that will work.  Thanks for your help everyone!

post #13 of 18
post #14 of 18
Quote:
Originally Posted by DaveOmak View Post

http://www.walmart.com/ip/PostMaster-Galvanized-Steel-Mailbox/16781382


$10 at w-mart....

I'm a new guy to the forums, but not to heat and metal. That mailbox is galvanized. Having been sick with MFF in the past, I would recommend staying as far from galvanized anything with my smoker. Plain or stainless steel is ok.

Cody
post #15 of 18
Quote:
Originally Posted by LBC970 View Post

I'm a new guy to the forums, but not to heat and metal. That mailbox is galvanized. Having been sick with MFF in the past, I would recommend staying as far from galvanized anything with my smoker. Plain or stainless steel is ok.

Cody


The AMNPS does not get NEAR hot enough to cause a problem with the galvanizing..... and there is a continuous air flow through the MB to help keep it cool....
post #16 of 18

i used a cheep blue enamel turkey roaster ...

works great

 

GOOD LUCK !!

post #17 of 18
Thread Starter 
Goliath do you have a picture of your setup?
post #18 of 18

here are some pics, in the pic i have a "home built" AMNPS but i found a Canadian supplier and now have the real deal. well worth the few dollars it cost. it was the shipping that was stopping me before. i couldnt justify paying as much or more for shipping than the product !!! i actually run 2 sometimes cause my smoker is pretty big. i drilled a hole and welded a piece of light pipe to the top of the roaster, drilled holes all around the roaster for good air supply. if you dont have access to a welder just some heating duct pop rivetted and some high temp silicon would do the trick. you can always tape off holes if you think you are getting too much air. i control the draft on the top of my smoker. one thing i noticed is that if i am cold smoking in the middle of winter i set the smoker temp to 60 - 70 degrees to create a draft of air, (flow) this is because when it was windy outside it was blowing smoke into my shop. 1st time i came in and seen this i thought i my shop caught fire ...  LOL

 

 

 

 

 


i switched to this longer piece of flex hose because its easier to get the lid off and on. when not in use i just store the whole works in the smoker ....

i even used my masterbuilt cold smoke unit for a bit but have settled on this turkey roaster mod and never looked back


and this is how i hook it up to my MES, actually cool enough for a true cold smoke

 

 

GOOD LUCK

 

Goliath

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: UDS Builds