• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

2 chamber Reverse Flow

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

kaizerscall

Smoke Blower
Joined
Jan 22, 2012
Messages
109
Reaction score
12
Location
Weymouth, Mass
I've finally found a little time to start my build. I started with a bottom base 62"x 22" 12" deep.

32c576cc_richiesphone189.jpg
 
Let me bring ya up to date here......

From the base I cut into trough and fabbed a 48"x30" chest style.

I am gonna have fire box on right side. gonna have a drip/water pan act as baffel for control of air flow. Installed a damper to controll

if I want both chambers or either one.
 
I fabbed and installed cover to second chamber. 32"x 22" 18" high with 45 degree at top front n back.
dc6be210_richiesphone194.jpg
bd1796f7_richiesphone198.jpg
 
looks great.  nice looking setup.  cant wait to see the final product.
 



I started on the fire box.Gonna be double walled  and insolated (I have a 5yr old and a 3yr old and when complete fire box will be rite at sholder height for them).

The inner chamber is 22" x 22" 18" high. It's made out of 3/16" black iron. When complete it will be

fishmouth style mounted on right hand side.

As I go I will figure out what lil bells and whistles I can build into this.
 
GUTTA BACK TRACK...........

I got a little ahead of my self a bit! I rushed things in the begging of this build. The RF/drip pan I origianly fabbed is made out of 14Gage. This is my first build and after reading others builds here

I caught that plate is also used for radiant heat! The pans I already have in place are not welded! So I don't have any welds to cut. Thank God!

The new plates will be 3/16ths. I have a few days off work so hopefully I can get some work done.

I'll post some pics coming up......
 
Keep those pics coming! This is a crazy awesome build. I want one just like it only maybe a little longer horizontal chamber. I need it to hold a 220 pound whole hog. But other than that... I want one just like this! Very cool. Thanks for posting. Can't wait for more!!

:sausage:
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Back
Top
Clicky