Got my parts being put together.
Putting the receptacle box together. For now the switch is not hot. This will go to power on/off the 1/10 hp pump when i get it.
Wiring the plug.
Break the tabs off the plug or it will not fit. There are perf maks for easy breaking.
All done. The plug will be for my grinder pedal and the valve will be wired and plugged to the piggy back on the pedal plug.
WOOOOHOOO It works...... Now the valve.
This is my leak box (should that happen)
I fastened the double valve. I bought it new at an appliance repair place for $14. Its a double so i will wire one valve and have a backup. I put a cap on the one not being used.
The hose from the valve to the T will go to the inlet side of the stuffer. The plug hose will eventually be connected to the pump which will draw the piston back. I will need braided hose for when that is installed.
I found water hose quick disconnects by the hoses at Lowes. Hope they work. NOTE to self. Buy an extra extension cord to wire the valve....HA
Keeps all the parts together to even.
Its still a work in progress before the maiden water test.