SmokingMeatForums.com › Forums › Smoking Meat (and other things) › Sausage › advise for a newbie "equipment"
New Posts  All Forums:Forum Nav:

advise for a newbie "equipment"

post #1 of 7
Thread Starter 

I would like to give a try to making some sausagesausage.gifdrool.gif but I do not have any equipment

 

I am on a tight budget,  and looking for some advise on some cheap entry level stuff

 

to start out with that will do the job, but not break as soon as I try to use it.

 

I just need a list of the basic tools needed to give this a shot.

 

This is on I was looking at seems to have some good reviews listed but does it really

 

work as a stuffer also? 

 

remember I'm not going in mass production just giving it a try.icon_lol.gif

 

http://www.northerntool.com/shop/tools/product_200449320_200449320 

 

 

post #2 of 7
Quote:
Originally Posted by sunman76 View Post

I would like to give a try to making some sausagesausage.gifdrool.gif but I do not have any equipment

 

I am on a tight budget,  and looking for some advise on some cheap entry level stuff

 

to start out with that will do the job, but not break as soon as I try to use it.

 

I just need a list of the basic tools needed to give this a shot.

 

This is on I was looking at seems to have some good reviews listed but does it really

 

work as a stuffer also? 

 

remember I'm not going in mass production just giving it a try.icon_lol.gif

 

http://www.northerntool.com/shop/tools/product_200449320_200449320 

 

 


Sunman, if your just looking at trying to make some sausage, you can actually make several types without any equipment at all. You can buy ground beef and or ground pork from your butcher or grocer. Ground chuck will have a fat content of about 20%, which is very acceptable and ground pork will usually have a very acceptable fat content. They may even grind your beef and pork for you if you ask them to. Just tell them the type of grind your looking for (coarse, medium or fine) and the fat content you want. You can make patties for fresh breakfast sausage, or hand roll chubs for smoked summer sausage and sticks for snack sticks. Remember, if your going to smoke them be sure to use cure#1 which is very inexpensive and available from any sausage supply company.

 

I've never tried stuffing casings with a grinder. Many folks here have. I hear it's a little difficult, but it's been done for years. Maybe someone else who has experience with it can chime in here.

 

ShortEnd
 

 

post #3 of 7

For 40 bucks more you can get this one and it has all the stuffing attachments. Probably your best value. It's the one I use. And it does very well.

http://www.northerntool.com/shop/tools/product_200451267_200451267?cm_sp=Upsells-_-Top%20Sellers-_-Product%20Page

 

brats0.JPG

brats2.jpg

brats5.JPG

 

post #4 of 7
Thread Starter 

ShortEnd
    Thanks for the advise that will be a good idea for me to try while I'm saving up a few dollars for a grinderthumb1.gif thank you!

 

 

 

Alelover

 

thanks also for the advise thats the one they have on sale right now.  I thought that was you in the customer summited photo there for a minute.biggrin.gif

 

I like that one and it is good to hear from a trusted source on how it works thank you!

 

 

post #5 of 7

A number of folks use the $99 Northern Tools Electric Grinder/stuffer unit that Alelover depicted & have had great success.

 

It seems to be not only reasonably priced, but of sufficient quality for people wishing to give sausage-making a try & not break the bank—and durable enough to last should your production increase. 

 

Hand-grinders have appeal— particularly their low entry cost. But most do not allow for efficient stuffing—plus you'd need a few extra hands to assist.

Ideally, a separate stuffer is best, whether you go electric or hand-crank on the grinder, but at least with the electric, stuffing is less cumbersome.

 

—Kevin

post #6 of 7

Having a separate stuffer is ideal but for us cheapskates, I mean frugal folks, the grinder/stuffer for 99 bucks is about as good a value as you will see.

post #7 of 7
Thread Starter 

Electric is the way I want to go now.  I read some of the reviews and people hooked there drills up to the hand crank ones... 

 

yea so for a few more  cartoon-deer-8.gif's

 

I like the Ale postedbeercheer.gif

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Sausage
SmokingMeatForums.com › Forums › Smoking Meat (and other things) › Sausage › advise for a newbie "equipment"