Small Batch Indoor Cold Smoking......

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

diggingdogfarm

Master of the Pit
Original poster
Jun 23, 2011
4,648
177
Southern Tier of New York State
"I spent several weeks looking for a reliable and inexpensive way to do indoor cold smoking.

I settled on rolled cigarettes (LOL) heated with a soldering iron because it’s possible to smoke with pure tea leaves, herbs, sawdust, etc. without the fuel burning up too rapidly.

I invested about $20 in the cigarette roller, papers, soldering iron, spring and clamp."

9a0d405b_2vnngh3.jpg


"Below is some rosemary being rolled."

2e1c8463_2coh6jm.jpg


"Maple smoked butter, rosemary smoked foccacia, tea smoked hard-boiled eggs….the possibilities are endless."

158331b2_1zf0k07.jpg


"The cigarette must be able to slide freely inside the spring. The soldering iron raises the temperature inside the cold oven only about 10 degrees above room temperature. Each cigarette smokes for about 30-40 minutes. A vent hood is recommended. My vent hood doesn’t vent to the outside, but that wasn’t a problem with a window open and the ceiling fan running. : )

It's habit forming!!!!!"  :D
 
Last edited:
Thanks for the repost Diggy,  that's one great  idea,  and will have to try it soon.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky