What Can I use to seal a thermomoter?

Discussion in 'Messages for All Guests and Members' started by bbrock, May 24, 2009.

  1. bbrock

    bbrock Meat Mopper

    I have a charcoal and wood smoker I replaced the themomoter. The hole is bigger than what I need for the new Themomoter so I got a double sided high temp tape for the time being. I am losing heat and smoke where it is not sealed tight. Is there a High temp caulk I could buy to use. Thanks for any info.
     
  2. travcoman45

    travcoman45 Master of the Pit OTBS Member

    Most done it ta yerself stores carry a red fire caulk, usually in with the furnace er wood stove stuff.
     
  3. bbq engineer

    bbq engineer Master of the Pit OTBS Member SMF Premier Member

    You can also probably find a bushing at a "done it ta yerself store" (love that Trav!) that will account for the extra diameter...that is if the old one and the new one both have a threaded base. I don't know what you have there, so it is just a thought.
     
  4. morkdach

    morkdach Master of the Pit OTBS Member

    "done it ta yerself store" (love that Trav!)lol me too.[​IMG][​IMG]
    try flat washers if threads are long enough.
     

Share This Page